OSHA SearchOSHA records by employer

A-1 Roofing: OSHA inspections and violations

Midway, Utah · Roofing Contractors · NAICS 238160

1inspections
4citation items
$750current penalties
Apr 2, 2020last inspection

OSHA has inspected A-1 Roofing once in Utah.

The inspection began on Apr 2, 2020 as a planned inspection, in Midway.

That inspection ended with 4 citation items: 2 serious and 2 other-than-serious.

Penalties were first proposed at $1,500 and now stand at $750, 50% lower after settlements or reviews.

Ladders in construction comes up most often in these citations: 2 items under 1926.1053.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and A-1 Roofing averages $750 (1 cited inspection).

A-1 Roofing: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Utah · latest 90 days of OSHA records

68employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Utah

Checking a subcontractor, a client or your own company? Watch A-1 Roofing and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344717715 OPENED APR 2, 2020Closed

Planned · Partial · Safety · 3 employees at the site · Closed May 20, 2020

1455 Dutch Canyon Ct, Midway, UT 84049 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$1,500$750Apr 16, 2020Final
Citation 1, item 1b
29 CFR 1926.1053(b)(7) · Ladders in construction
 Serious$0$0Apr 16, 2020Final
Citation 2, item 1
29 CFR 1926.502(d) · Fall protection systems
 Other-than-serious$0$0Apr 16, 2020Final
Citation 2, item 2
29 CFR 1926.503(b)(1) · Fall protection training in construction
 Other-than-serious$0$0Apr 16, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(7)

(7) Ladders shall not be used on slippery surfaces unless secured or provided with slip-resistant feet to prevent accidental displacement. Slip-resistant feet shall not be used as a substitute for care in placing, lashing, or holding a ladder that is used upon slippery surfaces including, but not limited to, flat metal or concrete surfaces that are constructed so they cannot be prevented from becoming slippery.

29 CFR 1926.502 · Fall protection systems

29 CFR 1926.502(d)

(d) Personal fall arrest systems. Personal fall arrest systems and their use shall comply with the provisions set forth below. Effective January 1, 1998, body belts are not acceptable as part of a personal fall arrest system. Note: The use of a body belt in a positioning device system is acceptable and is regulated under paragraph (e) of this section.

29 CFR 1926.503 · Fall protection training in construction

Other roofing contractors employers in Utah

Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.