OSHA SearchOSHA records by employer

A-G Constructions, LLC: OSHA inspections and violations

Winston Salem, North Carolina · Poured Concrete Foundation and Structure Contractors · NAICS 238110

1inspections
3citation items
$750current penalties
Apr 23, 2026last inspection

OSHA inspectors have visited A-G Constructions, LLC in North Carolina one time.

It opened on Apr 23, 2026 as a planned inspection, in Winston Salem and is still open.

In all, OSHA issued 3 citation items: 1 serious and 2 other-than-serious.

The penalties, $750 in total, stand where OSHA first set them.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. A-G Constructions, LLC averages $750 across 1 cited inspection.

A-G Constructions, LLC: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Want to know if OSHA cites A-G Constructions, LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348896010 OPENED APR 23, 2026Open

Planned · Complete · Safety · 8 employees at the site · Open

4104 - 4140 Old Vineyard Road, Winston Salem, NC 27104 · Poured Concrete Foundation and Structure Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.300(b)(2) · Tools—Hand and Power: general requirements
 Serious$750$750May 26, 2026Final
Citation 2, item 1
29 CFR 1926.150(c)(1)(vi) · Fire protection
 Other-than-serious$0$0May 26, 2026Final
Citation 2, item 2
29 CFR 1926.306(b)(3)(i) · Air receivers
 Other-than-serious$0$0May 26, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.150 · Fire protection

29 CFR 1926.150(c)(1)(vi)

(vi) A fire extinguisher, rated not less than 10B, shall be provided within 50 feet of wherever more than 5 gallons of flammable or combustible liquids or 5 pounds of flammable gas are being used on the jobsite. This requirement does not apply to the integral fuel tanks of motor vehicles.

29 CFR 1926.300 · Tools—Hand and Power: general requirements

29 CFR 1926.300(b)(2)

(2) Belts, gears, shafts, pulleys, sprockets, spindles, drums, fly wheels, chains, or other reciprocating, rotating or moving parts of equipment shall be guarded if such parts are exposed to contact by employees or otherwise create a hazard. Guarding shall meet the requirements as set forth in American National Standards Institute, B15.1-1953 (R1958), Safety Code for Mechanical Power-Transmission Apparatus.

29 CFR 1926.306 · Air receivers

29 CFR 1926.306(b)(3)(i)

(3) Gages and valves. (i) Every air receiver shall be equipped with an indicating pressure gage (so located as to be readily visible) and with one or more spring-loaded safety valves. The total relieving capacity of such safety valves shall be such as to prevent pressure in the receiver from exceeding the maximum allowable working pressure of the receiver by more than 10 percent.

Other poured concrete foundation and structure contractors employers in North Carolina

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.