OSHA SearchOSHA records by employer

Ace Electrical Services: OSHA inspections and violations

West Valley City, Utah · Electrical Contractors and Other Wiring Installation Contractors · NAICS 238210

1inspections
4citation items
$2,100current penalties
Apr 20, 2023last inspection

OSHA inspectors have visited Ace Electrical Services in Utah one time.

It opened on Apr 20, 2023 after a complaint, in West Valley City.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $4,200; today they stand at $2,100, 50% less.

The rule cited most here is 1910.147 (lockout/tagout), 3 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. Ace Electrical Services averages $2,100 across 1 cited inspection.

Ace Electrical Services: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Want to know if OSHA cites Ace Electrical Services again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 346646102 OPENED APR 20, 2023Closed

Complaint · Partial · Safety · 18 employees at the site · Closed Jul 11, 2023

2500 S 5600 W, West Valley City, UT 84081 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.137(c)(2)(xii) · Electrical protective equipment
 Serious$2,100$1,050May 12, 2023Final
Citation 1, item 2a
29 CFR 1910.147(c)(6)(ii) · Lockout/tagout
 Serious$2,100$1,050May 12, 2023Final
Citation 1, item 2b
29 CFR 1910.147(c)(7)(iv) · Lockout/tagout
 Serious$0$0May 12, 2023Final
Citation 1, item 2c
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
 Serious$0$0May 12, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.137 · Electrical protective equipment

29 CFR 1910.137(c)(2)(xii)

(xii) The employer shall certify that equipment has been tested in accordance with the requirements of paragraphs (c)(2)(iv), (c)(2)(vii)(D), (c)(2)(viii), (c)(2)(ix), and (c)(2)(xi) of this section. The certification shall identify the equipment that passed the test and the date it was tested and shall be made available upon request to the Assistant Secretary for Occupational Safety and Health and to employees or their authorized representatives.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(6)(ii)

(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.

Other electrical contractors and other wiring installation contractors employers in Utah

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.