Acme Brick Company: OSHA inspections and violations
Malvern, Arkansas · Clay Building Material and Refractories Manufacturing · NAICS 327120
13inspections
13citation items
$26,771current penalties
Nov 27, 2023last inspection
Acme Brick Company has 13 OSHA inspections on record in Arkansas, the first in 1980.
OSHA's last visit started on Nov 27, 2023 on a referral, in Jonesboro.
Across those inspections OSHA issued 13 citation items: 7 serious and 6 other-than-serious.
OSHA proposed $50,032 in penalties. After settlements and reviews the total is $26,771, down 46%.
Most often, OSHA cited 1910.212, machine guarding (3 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Acme Brick Company averages $10,856 over 2 cited inspections in that time.
Acme Brick Company also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Arkansas · latest 90 days of OSHA records
16employers cited
Get notified the morning OSHA posts each new citation in Arkansas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Malvern site logged 6 recordable injuries or illnesses among about 120 workers: 4.1 per 100 full-time workers, against a median of 3.0 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Perla Brick Plants
Malvern · 2022
120
6
1
4.1
3.0
Ouachita Brick Plant
Malvern · 2022
63
1
0
1.6
3.0
Jonesboro Brick Plant
Jonesboro · 2022
52
4
3
7.9
3.0
Little Rock Sales Office
Little Rock · 2022
21
0
0
0.0
4.5
Wheeler Tunnel Plant
Jonesboro · 2019
42
4
0
8.9
3.0
Fort Smith Brick Plant
Fort Smith · 2018
45
7
0
17.8
3.0
Wheeler Brick Plant
Jonesboro · 2016
36
0
0
0.0
3.0
Included with any plan: 11 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
On July 2, 2025, an employee was walking to a building through a shed used to store dirt and went to climb a 45-inch pile of loose clay material when they tripped and fell forward. The employee sustained a dislocated right ankle, torn ligaments, a fractured tibia, and sprains to the right ankle and leg. The employee was hospitalized.
Nov 9, 2023, Jonesboro: Hospitalization · bruises, contusions · wrist(s)
An employee was packaging brick when a brick broke and became jammed between the back plate and the jig side. When the jig cycled, the broken brick caused the jig to buckle. As the employee was putting brick into the jig, his left wrist struck the outer side of the buckled jig, resulting in a contusion that required hospitalization.
Sep 8, 2022, Malvern: Hospitalization · effects of heat and light, n.e.c. · body systems
An employee was working in the grinding department at a brick making plant, where the temperature was in the low 80s. The employee's hands and legs started to cramp due to suspected dehydration; he was hospitalized.
Apr 20, 2020, Malvern: Hospitalization · fractures and dislocations · shoulder(s) and arm(s)
A temporary employee cleaned a tripper and radioed the operator to restart the machine. The employee was then caught in a rotating shaft, suffering a left shoulder dislocation and left arm fracture that required hospitalization. The guard was removed at the time of the incident.
May 17, 2018, Malvern: Hospitalization · fractures · lower leg(s)
An employee was operating a setting machine when a load of green brick became jammed in the machine. The employee turned the safety keys to set the machine to safe mode, removed the key, and attempted to unjam the machine. The machine then cycled with the employee inside, causing two tibia fractures and a puncture wound to the ankle.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.145 · Specifications for accident prevention signs and tags
29 CFR 1910.145(c)(3)
(3) Safety instruction signs. Safety instruction signs shall be used where there is a need for general instructions and suggestions relative to safety measures.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.23 · Guarding floor and wall openings and holes
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.