Advanced Drainage Systems Inc.: OSHA inspections and violations
Iowa City, Iowa · Plastics Pipe and Pipe Fitting Manufacturing · NAICS 326122
12inspections
7citation items
$4,705current penalties
Mar 6, 2023last inspection
Since 1974, OSHA inspectors have visited Advanced Drainage Systems Inc. in Iowa 12 times.
The most recent inspection opened on Mar 6, 2023 on a referral, in Waterloo.
In all, OSHA issued 7 citation items: 4 serious and 3 other-than-serious.
The proposed penalties came to $9,965; today they stand at $4,705, 53% less.
The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Advanced Drainage Systems Inc. averages $2,192 across 2 cited inspections.
Advanced Drainage Systems Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
66employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Advanced Drainage Systems Inc. and get notified the morning OSHA posts a new citation for it.
OSHA records show Advanced Drainage Systems Inc. at 39 sites in 15 states. Together they've had 88 inspections and $224,152 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 39 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jul 26, 2017: Employee sustains skull fracture when struck by coiling mach
At 9:00 p.m. on July 26, 2017, Employee #1 was closing the 700-pound gate on the coiling machine. The gate detached from the machine and struck the employee, landing on top of him. The employee sustained a skull fracture and was hospitalized for his injuries.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Eagle Grove site logged 1 recordable injury or illness among about 77 workers: 1.5 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 90 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Eagle Grove site
Eagle Grove · 2025
77
1
1
1.5
2.6
Waterloo site
Waterloo · 2025
70
0
0
0.0
2.3
Advanced Drainage Systems Inc.-Eagle Grove
Eagle Grove · 2019
61
3
2
4.8
2.6
Advanced Drainage Systems Inc.--Oelwein
Oelwein · 2018
20
0
0
0.0
2.6
Included with any plan: 13 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(6) Sources of ignition—(i) General. Adequate precautions shall be taken to prevent the ignition of flammable vapors. Sources of ignition include but are not limited to open flames; lightning; smoking; cutting and welding; hot surfaces; frictional heat; static, electrical, and mechanical sparks; spontaneous ignition, including heat-producing chemical reactions; and radiant heat.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Other plastics pipe and pipe fitting manufacturing employers in Iowa
Centro, Inc.North Liberty · 69 citations · $31,282
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.