OSHA SearchOSHA records by employer

Advanced Technology Services: OSHA inspections and violations

Springfield, Missouri · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · NAICS 811310

2inspections
4citation items
$13,242current penalties
May 15, 2019last inspection

Since 2008, OSHA inspectors have visited Advanced Technology Services in Missouri 2 times.

The most recent inspection opened on May 15, 2019, in North Kansas City.

In all, OSHA issued 4 citation items: 2 serious, 1 repeat and 1 other-than-serious.

The proposed penalties came to $20,934; today they stand at $13,242, 37% less.

Among repair and personal services employers, the typical cited inspection since 2015 ends with a $1,200 penalty. Advanced Technology Services averages $7,842 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Advanced Technology Services: OSHA citation items per year, 2008 to 2019
Citation items per year, by inspection date.

Want to know if OSHA cites Advanced Technology Services again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 344013016 OPENED MAY 15, 2019Closed

Unprogrammed other · Complete · Safety · 14 employees at the site · Closed Nov 15, 2019

1115 Armour Road, North Kansas City, MO 64116 · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.157(c)(1) · Portable fire extinguishers
 Other-than-serious$5,115$3,069Oct 16, 2019Final
Citation 1, item 2
29 CFR 1910.305(g)(1)(iv)(a) · Electrical wiring methods
 Serious$6,819$4,773Oct 16, 2019Final

Inspection 310939061 OPENED FEB 20, 2008Closed

Planned · Partial · Safety · 30 employees at the site · Closed Mar 18, 2008

2601 West Battlefield Road, Springfield, MO 65807 · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(3)(ii) · Machine guarding
 Serious$1,500$900Feb 29, 2008Closed
Citation 2, item 1
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
 Repeat$7,500$4,500Feb 29, 2008Closed

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Sep 9, 2020, North Kansas City: Hospitalization · fractures and other injuries, n.e.c. · multiple body parts, n.e.c.

An employee was climbing a ladder when it slipped out from under him. He fell 5-7 feet to the floor below, suffering a head laceration, a broken wrist, and a possible spleen injury.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.157 · Portable fire extinguishers

29 CFR 1910.157(c)(1)

(c) General requirements. (1) The employer shall provide portable fire extinguishers and shall mount, locate and identify them so that they are readily accessible to employees without subjecting the employees to possible injury.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.305 · Electrical wiring methods

Other commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance employers in Missouri

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.