OSHA SearchOSHA records by employer

Ahi Supply, L.P.: OSHA inspections and violations

Buda, Texas · Brick, Stone, and Related Construction Material Merchant Wholesalers · NAICS 423320

1inspections
3citation items
$6,138current penalties
Apr 15, 2019last inspection

Ahi Supply, L.P. has one OSHA inspection on record in Texas.

OSHA opened it on Apr 15, 2019 as a planned inspection, in Buda.

From that inspection OSHA issued 3 citation items: 3 serious.

OSHA proposed $10,230 in penalties. After settlements and reviews the total is $6,138, down 40%.

For context, across all wholesale employers the median penalty per cited inspection since 2015 is $3,425. Ahi Supply, L.P. averages $6,138 over 1 cited inspection in that time.

Ahi Supply, L.P.: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

393employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Ahi Supply, L.P. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343931978 OPENED APR 15, 2019Closed

Planned · Complete · Safety · 46 employees at the site · Closed May 6, 2019

1585 Jack C Hayes Trail, Buda, TX 78610 · Brick, Stone, and Related Construction Material Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
Serious$5,115$3,069Apr 18, 2019Final
Citation 1, item 2a
29 CFR 1910.212(a)(1) · Machine guarding
Serious$5,115$3,069Apr 18, 2019Final
Citation 1, item 2b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Apr 18, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(e)(1)(i)

(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.

29 CFR 1910.28 · Fall protection in general industry

29 CFR 1910.28(b)(1)(i)

(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:

Other brick, stone, and related construction material merchant wholesalers employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.