OSHA SearchOSHA records by employer

Akima Facilities Operations, LLC: OSHA inspections and violations

Fort Carson, Colorado · National Security · NAICS 928110

1inspections
4citation items
$18,120current penalties
Aug 18, 2023last inspection

OSHA inspectors have visited Akima Facilities Operations, LLC in Colorado one time.

It opened on Aug 18, 2023 to follow up on an earlier case, in Fort Carson.

In all, OSHA issued 4 citation items: 4 other-than-serious.

The penalties, $18,120 in total, stand where OSHA first set them.

The rule cited most here is 1910.213 (woodworking machinery), 2 times.

Among public administration employers, the typical cited inspection since 2015 ends with a $0 penalty. Akima Facilities Operations, LLC averages $18,120 across 1 cited inspection.

Akima Facilities Operations, LLC also files yearly injury logs with OSHA, summarized below.

Akima Facilities Operations, LLC: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Colorado · latest 90 days of OSHA records

132employers cited

Get notified the morning OSHA posts each new citation in Colorado: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Colorado

Checking a subcontractor, a client or your own company? Watch Akima Facilities Operations, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346921745 OPENED AUG 18, 2023Closed

Follow-up · Complete · Safety · 330 employees at the site · Closed Oct 20, 2023

2400 Oconnel Blvd, Fort Carson, CO 80913 · National Security · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(2) · Woodworking machinery
Other-than-serious$7,590$7,590Sep 14, 2023Final
Citation 1, item 1b
29 CFR 1910.213(c)(3) · Woodworking machinery
Other-than-serious$0$0Sep 14, 2023Final
Citation 1, item 2
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Other-than-serious$4,838$4,838Sep 14, 2023Final
Citation 1, item 3
29 CFR 1910.334(a)(2)(ii) · Using electrical equipment
Other-than-serious$5,692$5,692Sep 14, 2023Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2024, the Fort Carson site logged 20 recordable injuries or illnesses among about 329 workers: 6.6 per 100 full-time workers, against a median of 0.0 for its industry. Those cases cost 53 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Fort Carson site
Fort Carson · 2024
329 20206.60.0

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.334 · Using electrical equipment

Other national security employers in Colorado

Alert subscribers get notified of each newly cited employer in Colorado the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.