OSHA SearchOSHA records by employer

Akin Building Centers: OSHA inspections and violations

Atlantic, Iowa · Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers · NAICS 423310

1inspections
5citation items
$7,500current penalties
Jul 7, 2020last inspection

OSHA inspectors have visited Akin Building Centers in Iowa one time.

It opened on Jul 7, 2020 on a referral, in Atlantic.

In all, OSHA issued 5 citation items: 5 serious.

The proposed penalties came to $11,081; today they stand at $7,500, 32% less.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among wholesale employers, the typical cited inspection since 2015 ends with a $3,425 penalty. Akin Building Centers averages $7,500 across 1 cited inspection.

Akin Building Centers: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Iowa · latest 90 days of OSHA records

69employers cited

Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Iowa

Checking a subcontractor, a client or your own company? Watch Akin Building Centers and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344822390 OPENED JUL 7, 2020Closed

Referral · Partial · Safety · 20 employees at the site · Closed Nov 16, 2020

110 East 3rd Street, Atlantic, IA 50022 · Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Incident on Jun 26, 2020: Employee punctures neck when struck by block during cutting

At 11:00 a.m. on June 26, 2020, an employee working as a laborer for a lumber products wholesaler was cutting a small 4-inch-wide by 4-inch-long by 4-inch-thick piece of treated pine block for a customer. The customer had marked lines on the wood block for cuts. The customer wanted the wood cut slightly shorter, so the employee began the cutting using a Rockwell Manufacturing Delta Unisaw. The employee was using both hands to control the wood without using either the fence or the crosscutting implement. The employee was also using the saw without the guard in place and stated that the guard had been left up when he came to use the saw. The employee took one hand off of the wood to readjust his hand. At this point, the blade caught the piece of wood and threw it back towards the victim striking him in the throat. The Unisaw motor was spinning at 3,450 revolutions per minute (RPM). The employee was taken to the main store building and then transported to the hospital. The employee sustained a hole in his voice box as well as broken cartilage in his throat and was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(5) · Machine guarding
Serious$2,557$1,750Sep 15, 2020Final
Citation 1, item 2a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$4,262$4,000Sep 15, 2020Final
Citation 1, item 2b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0Sep 15, 2020Final
Citation 1, item 2c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0Sep 15, 2020Final
Citation 1, item 3
29 CFR 1910.304(g)(6)(vi)(c)(5) · Grounding and circuit protection
Serious$4,262$1,750Sep 15, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(5)

(5) Exposure of blades. When the periphery of the blades of a fan is less than seven (7) feet above the floor or working level, the blades shall be guarded. The guard shall have openings no larger than one-half ( 1/2) inch.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.304 · Grounding and circuit protection

Other lumber, plywood, millwork, and wood panel merchant wholesalers employers in Iowa

Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.