OSHA SearchOSHA records by employer

Alcoa Fastening Systems: OSHA inspections and violations

Fullerton, California · Bolt, Nut, Screw, Rivet, and Washer Manufacturing · NAICS 332722

13inspections
14citation items
$68,370current penalties
Mar 18, 2015last inspection

OSHA has inspected Alcoa Fastening Systems 13 times in California since 2002.

The latest one began on Mar 18, 2015 after an accident, in Torrance.

Those inspections ended with 14 citation items: 4 serious and 10 other-than-serious.

Penalties were first proposed at $108,770 and now stand at $68,370, 37% lower after settlements or reviews.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Alcoa Fastening Systems averages $19,000 (1 cited inspection).

Alcoa Fastening Systems: OSHA citation items per year, 2002 to 2015
Citation items per year, by inspection date.

California · latest 90 days of OSHA records

1,130employers cited

Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in California

Checking a subcontractor, a client or your own company? Watch Alcoa Fastening Systems and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340505205 OPENED MAR 18, 2015Closed

Accident · Partial · Safety · 750 employees at the site · Closed Aug 29, 2019

3000 W Lomita Blvd, Torrance, CA 90505 · Bolt, Nut, Screw, Rivet, and Washer Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 342(A)
Other-than-serious$5,000$3,750Jul 16, 2015Final
Citation 2, item 1
29 CFR 3314(D)
Serious$18,000$15,000Jul 16, 2015Final
Citation 4, item 1
29 CFR 3314(L)(1)
Other-than-serious$6,750$250Jul 16, 2015Final

Inspection 313649048 OPENED SEP 3, 2013Closed

Accident · Partial · Safety · 800 employees at the site · Closed Feb 22, 2014

3000 W Lomita Blvd, Torrance, CA 90505 · Precision Turned Product Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on May 1, 2013: Worker amputates fingers in hydraulic press

At approximately 11:37 a.m. on May 2, 2013, Employee #1, a 58-year-old female Ma chine Technician with Alcoa Fastening Systems was operating a hydraulic press in the Camloc Department. Employee #1 was working on stamping grommets in a hydrau lic press. The task is usually done in a press with two hand touch control. The normal press used for this task was down for maintenance. Employee #1 was told b y a coworker that she had been set up on another hydraulic press that had a one hand control. At approximately 2:40 p.m. Employee #1 reached into the point of o peration to place a grommet at the same time she activated the power press causi ng a serious injury of a partial amputation to her right index finger. Employee #1 was taken to US Health Works and then transferred to Western Hand where she w as treated for her injury. Casual Factor Employee #1 placed his hand on an ungua rded portion of the power punch press and accidently activated the machine. Empl oyee #1 had been employed by the company for 19 years.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 4206 A
Serious$18,000$5,850Oct 25, 2013Final

Inspection 312668148 OPENED SEP 30, 2011Closed

Accident · Partial · Safety · 340 employees at the site · Closed Feb 9, 2012

135 N Unruh Ave, Industry, CA 91744 · Bolt, Nut, Screw, Rivet, and Washer Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 312665052 OPENED OCT 19, 2010Closed

Complaint · Partial · Health · 364 employees at the site · Closed Apr 9, 2011

135 N Unruh St, Industry, CA 91744 · Bolt, Nut, Screw, Rivet, and Washer Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Feb 12, 2011: Employee trips and fractures hip

On February 12, 2011, an employee, a machine operator, was turning her position to walk to another location. She fell when her right foot caught between the leg s of a two-step step ladder she had placed there for access to a machine's hoppe r. The employee was admitted to the hospital, received surgery on her fractured hip and remained in the hospital for greater than 24 hours. The employee had pla ced the step ladder at the Deburring Stamper Machine in order to view the hopper . She also used the ladder to sit on when she manually worked the Slotter Machin e and occasionally used it to access the top of the two machines for cleaning.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 5143 A05
Other-than-serious$185$185Mar 18, 2011Closed
Citation 1, item 2
29 CFR 5194 F04 B
Other-than-serious$185$185Mar 18, 2011Closed

Inspection 310297239 OPENED APR 9, 2009Closed

Accident · Partial · Safety · 1,100 employees at the site · Closed Aug 3, 2009

1338 N Knollwood Cr, Anaheim, CA 92801 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Mar 20, 2009: Employee amputates finger in welding fixture

On March 20, 2009, Employee #1 was operating a resistance welder, manufactured b y Seedorff Acme Corporation (Model and Serial Number were unavailable). This emp loyer manufactures various types of metal fasteners used in the aerospace indust ry. The employer was in the process of getting a "proof of concept" for this equ ipment, which was being operated at the manufacturer's facility. This equipment was used for welding a washer ring onto a nut to create a locknut. The manufactu rer had designed a fixture to hold the parts in place during the welding process . This fixture was designed and fabricated for the employer's applications, but it was being used and tested on a resistance welder manufactured for a different customer, because the actual welder for the employer was not yet assembled. Thi s special fixture was attached to the lower electrode of the welder and the part s, a nut and a washer, were being placed manually in the fixture. A foot control would activate the equipment to bring the top electrode down to contact the par ts in order to complete the welding process. These two electrodes operated at 6- volts of potential difference and approximately 800 pounds of force. At the time of this accident, Employee #1 had just placed a set of parts, a nut and a washe r, in the point of operation. While activating the foot pedal, she noticed that the two parts were not aligned properly and she reached in with her left hand to fix it when the top electrode came down on her left index finger. Employee #1 a mputated about 1/2 inch of her left index finger. She lost the entire nail and t he part of the finger under this nail. She was treated in the emergency room and was not hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 3203 A04
Other-than-serious$600$600Jun 23, 2009Closed
Citation 2, item 1
29 CFR 4184 B
Serious$18,000$18,000Jun 23, 2009Closed

Inspection 307200014 OPENED OCT 29, 2008Closed

Accident · Partial · Safety · 380 employees at the site · Closed Oct 30, 2010

135 N Unruh Ave, Industry, CA 91744 · Fastener, Button, Needle, and Pin Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Aug 16, 2008: Employee fractures left hip in fall

On August 16, 2008, an employee, a machine technician was working alone with a W aterbury Flat Roll Machine located at the worksite and tightening a nut on the m achine with a box wrench. The box wrench slipped off the nut, causing the employ ee to fall to the concrete ground. As the employee fell, he hit a metal pan that catches oil surrounding the machine, causing him to sustain a fracture of the l eft hip. The employee's supervisor was not in the area at the time of the incide nt, but was aware that the employee was working with the machine. The employee w as taken to Kaiser Permanente Medical Center and was treated for the fracture of the left hip. The employee underwent surgery and was hospitalized for four days .

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 342 A
Other-than-serious$5,000$3,500Apr 14, 2009Final

Inspection 309299774 OPENED NOV 15, 2007Closed

Accident · Partial · Safety · 1,100 employees at the site · Closed May 13, 2009

800 S State College Blvd, Fullerton, CA 92831 · Bolt, Nut, Screw, Rivet, and Washer Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Jul 29, 2007: Employee amputates finger when caught in press

On July 29 2007, Employee #1 was under the supervision of a coworker and was ope rating a Benchmaster 15-ton part-revolution punch press, Model Number 251A-2, Se rial Number 72127 (Employer designation 'Machine Number 3883'). At the time, the press was being used by Employee #1 to form small fasteners. The press is opera ted by simultaneously depressing two hand trip controls, which causes the machin e slide to cycle and form the metal. Employee #1 was using the machine as descri bed when at one point he reached into the die area to either place or remove a n ut by hand. Employee #1 depressed only the left palm button, which caused the ma chine to improperly cycle, and the die closed on his right index finger, amputat ing the tip. Employee #1 was taken by emergency response personnel to a nearby h ospital for treatment of his injured index finger but was not hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 4202 C
Other-than-serious$300$300Feb 14, 2008Closed

Inspection 309298347 OPENED JUL 11, 2007Closed

Accident · Partial · Safety · 1,100 employees at the site · Closed Feb 1, 2008

800 S State College Blvd, Fullerton, CA 92831 · Bolt, Nut, Screw, Rivet, and Washer Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Mar 15, 2007: Employee pinches finger in drill, amputation required later

On March 15, 2007, Employee #1 was operating an inclined drill used for tapping nuts fed from a vibratory bowl. Employee #1 determined that the drill needed to be adjusted to cut the tap slightly deeper. He accidentally pressed the drill's cycle-stop button instead of the emergency stop, and then reached in to turn a n ut to adjust the drilling depth. The machine, however, was still completing the cycle when Employee #1 reached in, and the machine pinched his right index finge r between a moving cylinder and the stop. Employee #1 later required amputation of the portion of his right index finger from the first joint to the end. Employ ee #1 was hospitalized.

No citations from this inspection.

5 older inspections

Inspection 125949701 OPENED MAY 12, 2006Closed

Accident · Partial · Safety · 100 employees at the site · Closed Aug 20, 2009

801 S Placentia Ave, Fullerton, CA 92831 · Bolt, Nut, Screw, Rivet, and Washer Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Mar 1, 2006: Employee injures finger while repairing grinder

On March 1, 2006, Employee #1 was adjusting a Cincinnati Centerless Grinder, Ser ial Number 2M2H2T-95. He was adjusting the oil coolant line to allow coolant to run between the two abrasive wheels that rotated in opposite directions from one another. One rotated at 1,200 rpm and the other rotated at 10 rpm. His hand sli pped and contacted the 1,200 rpm abrasive wheel. He suffered lacerations to his left index finger and was hospitalized for two days at Western Medical Center in Santa Ana, CA.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 2, item 1
29 CFR 3314 C
Other-than-serious$18,000$2,000Jun 16, 2006Final

Inspection 125947010 OPENED NOV 2, 2005Closed

Accident · Partial · Safety · 850 employees at the site · Closed Nov 19, 2007

800 S State College Blvd, Fullerton, CA 92831 · Other Aircraft Parts and Auxiliary Equipment Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Oct 14, 2005: Employee's finger is amputated in drill press

On October 14, 2005, Employee #1, a machining technician with an aerospace faste ning systems manufacturer, was operating a Wilton automated Drill Press (Number 2825). This press was used for beveling round aircraft fasteners (30 mm outside diameter, 15 mm inside diameter, and 15 mm high). Employee #1 picked up a fasten er with an extension tool and placed into the drill chuck for beveling. She then activated the beveling process by simultaneously placing both hands on the mach ine safety trip pads. At that time, the beveling bit came down, failed to make c ontact with the fastener, and retracted up to its start position. She repeated t he process, however, the press malfunctioned and stayed in the start position. W hen Employee #1 noticed that the fastener was positioned upside down, she releas ed the chuck pressure, and tried unsuccessfully to remove the fastener with an e xtension tool. Assuming the malfunctioning press would not reactivate, Employee #1 attempted to remove the fastener again by placing her right index finger in t he center of the fastener. When the press activated unexpectedly, the countersin k bit came down and amputated her finger between the first and second joint.

No citations from this inspection.

Inspection 305355000 OPENED DEC 2, 2004Closed

Accident · Partial · Safety · 250 employees at the site · Closed Oct 30, 2007

800 S State College Blvd, Fullerton, CA 92831 · Aircraft Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Nov 12, 2004: Employee's finger is amputated in hydraulic press

On November 12, 2004, Employee #1, a full-time set-up person, was troubleshootin g a Schmidt B4015 part revolution press, Model Number 36-178-02, Serial Number 3 -0001. The air nozzle on the press was not ejecting the part. As a coworker adju sted the air line in an attempt get the part out of the nest, Employee #1 asked the coworker to press the "on" button to see if the air pressure was strong enou gh to blow the part off. The coworker activated the press at the same time Emplo yee #1 put her finger into point of operation. Employee #1 sustained a complete amputation of her right index finger at the first joint and was hospitalized. Em ployee #1 did not deenergize the press during the troubleshooting operation.

No citations from this inspection.

Inspection 305476020 OPENED MAY 12, 2004Closed

Follow-up · Partial · Safety · 950 employees at the site · Closed May 28, 2004

3000 W Lomita Blvd, Torrance, CA 90505 · Bolt, Nut, Screw, Rivet, and Washer Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 120307558 OPENED JUN 5, 2002Closed

Accident · Complete · Safety · 500 employees at the site · Closed Jul 8, 2009

3000 W Lomita Blvd, Torrance, CA 90505 · OSHA's record · Phone and website on Google Maps

Incident on May 22, 2002: Employee injured while operating punch press

On May 22, 2002, Employee #1 was working for Fairchild Fastener, an employer tha t manufactures industrial fasteners primarily for aerospace industries. The empl oyee was operating a full revolution Benchmaster punch press, Model 1-7-3, with a 4-ton capacity. The actuation of the machine cycle depends on a simultaneous t wo-hand trip. The distance between the hand trip locations and the die/tool loca tion was 15 inches. The employee was performing crimping/closing-in of the beam of Part Number TR 26036N1032-1 (about 0.5 inches in length) and was seated about 7 inches to 8 inches in front of the press. The employee was nearing the comple tion of the production run. During one of the cycles, after the employee actuate d the two-hand trip system and as she reached out to pick up the finished part w ith her right hand, the slide with the tool came down again (without her actuati ng the two-hand trip) and smashed (over the bottom die) the tip of her right ind ex finger. The employee was transported to Torrance Memorial Medical Center wher e the tip of her finger was amputated.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1 Other-than-serious$375$375Oct 10, 2002Closed
Citation 1, item 2
29 CFR 4202 C
Other-than-serious$375$375Oct 10, 2002Closed
Citation 2, item 1
29 CFR 4211 B
Serious$18,000$18,000Oct 10, 2002Closed

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1430.7

Other bolt, nut, screw, rivet, and washer manufacturing employers in California

Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.