OSHA SearchOSHA records by employer

Alejandro Ramirez Perez: OSHA inspections and violations

Auburn, Alabama · Framing Contractors · NAICS 238130

4inspections
8citation items
$57,920current penalties
Jan 11, 2017last inspection

Since 2013, OSHA inspectors have visited Alejandro Ramirez Perez in Alabama 4 times.

The most recent inspection opened on Jan 11, 2017 as a planned inspection, in Opelika.

In all, OSHA issued 8 citation items: 2 serious and 6 repeat.

The proposed penalties came to $65,419; today they stand at $57,920, 11% less.

The rule cited most here is 1926.501 (fall protection in construction), 4 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Alejandro Ramirez Perez averages $17,000 across 1 cited inspection.

Alejandro Ramirez Perez: OSHA citation items per year, 2013 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites Alejandro Ramirez Perez again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342018207 OPENED JAN 11, 2017Closed

Planned · Partial · Safety · 6 employees at the site · Closed Oct 2, 2020

3453 Lakeshore Dr. Lot 19, Opelika, AL 36802 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
 Repeat$4,780$3,500Jan 19, 2017Final
Citation 1, item 2
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
 Repeat$4,780$3,500Jan 19, 2017Final
Citation 1, item 3
29 CFR 1926.501(b)(13) · Fall protection in construction
 Repeat$14,939$10,000Jan 19, 2017Final

Inspection 339935629 OPENED SEP 9, 2014Closed

Complaint · Complete · Safety · 6 employees at the site · Closed Feb 26, 2018

802 S Gay St., Auburn, AL 36830 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
 Repeat$15,400$15,400Sep 15, 2014Final

Inspection 339836645 OPENED JUN 30, 2014Closed

Planned · Partial · Safety · 6 employees at the site · Closed Dec 3, 2018

Lot 13 Millwood, Auburn, AL 36830 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Serious$2,640$2,640Jul 16, 2014Final
Citation 2, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
 Repeat$15,400$15,400Jul 16, 2014Final

Inspection 339417271 OPENED SEP 18, 2013Closed

Planned · Partial · Safety · 3 employees at the site · Closed Oct 13, 2016

1002 Garrison Ln, Auburn, AL 36830 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(d) · Woodworking tools
 Serious$3,080$3,080Sep 26, 2013Final
Citation 2, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
 Repeat$4,400$4,400Sep 26, 2013Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(d)

(d) Guarding. All portable, power-driven circular saws shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to the covering position.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(2)

(2) Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and walkway shall be at least 18 inches (46 cm) wide.

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in Alabama

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.