Alkota Cleaning Systems Inc.: OSHA inspections and violations
Alcester, South Dakota · All Other Miscellaneous Textile Product Mills · NAICS 314999
3inspections
3citation items
$9,000current penalties
Jul 5, 2023last inspection
OSHA has inspected Alkota Cleaning Systems Inc. 3 times in South Dakota since 1987.
The latest one began on Jul 5, 2023 after a complaint, in Alcester.
Those inspections ended with 3 citation items: 2 serious and 1 other-than-serious.
Penalties were first proposed at $12,500 and now stand at $9,000, 28% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 2 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,875, and Alkota Cleaning Systems Inc. averages $9,000 (1 cited inspection).
Alkota Cleaning Systems Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
South Dakota · latest 90 days of OSHA records
29employers cited
Get notified the morning OSHA posts each new citation in South Dakota: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Alkota Cleaning Systems Inc. and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Alcester site logged 9 recordable injuries or illnesses among about 92 workers: 9.9 per 100 full-time workers, against a median of 1.9 for its industry. Those cases cost 4 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Alkota Cleaning Systems Inc
Alcester · 2024
92
9
1
9.9
1.9
Included with any plan: 3 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(iii) Protection from arc welding rays. Where the work permits, the welder should be enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or shall be enclosed with noncombustible screens similarly painted. Booths and screens shall permit circulation of air at floor level. Workers or other persons adjacent to the welding areas shall be protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles.
Other all other miscellaneous textile product mills employers in South Dakota
Alert subscribers get notified of each newly cited employer in South Dakota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.