OSHA SearchOSHA records by employer

Alpine Construction & Design LLC: OSHA inspections and violations

Tenafly, New Jersey · Roofing Contractors · NAICS 238160

1inspections
3citation items
$31,256current penalties
Jul 16, 2019last inspection

OSHA has inspected Alpine Construction & Design LLC once in New Jersey.

The inspection began on Jul 16, 2019 as a planned inspection, in Tenafly.

That inspection ended with 3 citation items: 1 serious and 2 repeat.

Penalties were first proposed at $31,256 and still stand at $31,256.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Alpine Construction & Design LLC averages $31,256 (1 cited inspection).

Alpine Construction & Design LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

New Jersey · latest 90 days of OSHA records

272employers cited

39 of them in the same industry

Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Jersey

Checking a subcontractor, a client or your own company? Watch Alpine Construction & Design LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344158167 OPENED JUL 16, 2019Closed

Planned · Partial · Safety · 5 employees at the site · Closed Dec 7, 2023

216 Jefferson Ave, Tenafly, NJ 07670 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.404(f)(6) · Ground-fault protection on job sites
Serious$3,410$3,410Oct 10, 2019Final
Citation 2, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
Repeat$19,890$19,890Oct 10, 2019Final
Citation 2, item 2
29 CFR 1926.1053(b)(1) · Ladders in construction
Repeat$7,956$7,956Oct 10, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.404 · Ground-fault protection on job sites

29 CFR 1926.404(f)(6)

(6) Grounding path. The path to ground from circuits, equipment, and enclosures shall be permanent and continuous.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(13)

(13) Residential construction. Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of § 1926.502.

Other roofing contractors employers in New Jersey

Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.