Since 1995, OSHA inspectors have visited American Building Supply, Inc. in California 18 times.
The most recent inspection opened on Aug 21, 2020 after an accident, in Rialto.
In all, OSHA issued 63 citation items: 13 serious and 50 other-than-serious.
The proposed penalties came to $148,895; today they stand at $72,735, 51% less.
The rule cited most here is 4318.1 (), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. American Building Supply, Inc. averages $7,235 across 5 cited inspections.
American Building Supply, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,134employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch American Building Supply, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Jul 27, 2020: Employee suffers laceration to thumb while using skill saw
At 7:00 a.m. on July 27, 2020, an employee was preparing to cut a pallet support board using a skill saw with one hand when his other hand made contact with the saw blade. The employee suffered a laceration to his left thumb. The employee was treated but not hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3328(A)(2)
Other-than-serious
$935
$335
Jan 21, 2021
Final
Inspection 341413052 OPENED APR 19, 2016Closed
Planned · No inspection · Safety · 1 employee at the site · Closed Apr 20, 2016
Incident on Jun 23, 2009: Employee is injured when struck by door material
On June 23, 2009, Employee #1 was tailing off a piece of door material that was being cut by a panel saw. His coworker activated the panel saw, and another piec e of material was pushed into Employee #1. He had his back to the process, and w as struck in the side, causing a laceration to his kidney and a chipped vertebra . He was hospitalized for one week.
No citations from this inspection.
Inspection 310605860 OPENED MAR 9, 2009Closed
Accident · Partial · Safety · 60 employees at the site · Closed Sep 19, 2015
Incident on Feb 13, 2009: Employee amputates thumb with chop saw
At approximately 6:50 p.m. on February 13, 2009, an employee was cutting a stack of 10 wood pieces (2 high and 5 deep) by using a Slide Compound Saw, Hitachi, M odel Number C10FSH. The employee was holding the material with his left hand and was operating the saw with his right hand. As he finished cutting the top row a nd continued to cut the lower row, the saw kicked back. His left hand slipped an d hit the rotating blade causing amputation of his left thumb. The employee was hospitalized and treated for a thumb amputation.
Incident on Jul 25, 2007: Employee's finger injured in contact with shaper cutter
On July 25, 2007, Employee #1 was setting up the shaper to hog out the core of d oors the company was manufacturing. The shaper had a rotating cutter blade with speed settings between 2,900 and 10,000 rpm. Employee #1 was using a 30 in. long by 3 in. wide by 1.75 in. thick test board to determine the correct placement o f the cutter blade for the hog out operation. He was holding the test board in h is left hand as he pushed it into the shaper cutter. Almost immediately upon tou ching the cutter blade, the test board pulled violently to the right, in the sam e direction as the blade was rotating. Before Employee #1 could react, his left index finger struck against the cutter blade. he was transported to the hospital , where his finger was surgically amputated below the first joint. The shaper wa s equipped with a large auto-feed attachment that could be swung into place in f ront of the cutter to guard the blades from accidental contact. This attachment was useful when the material needed to be exposed to the shaper cutter from the leading edge all the way to the trailing edge. However, the auto-feed attachment could not be used on this job so it had been swung out of the way. There was no guard covering the rotating cutter blade during this set-up procedure. To "hog out" the cores at the bottom of the doors, the middle section of the core needed to be exposed to the cutters but not the two ends. Therefore, the doors could n ot be fed through the shaper automatically.
Incident on May 11, 2006: Employee amputates finger while operating door frame machine
At approximately 8:15 a.m. on May 11, 2006, Employee #1, a production worker, wa s operating one of five KVAL prefit door frame stapler, Model Number JCS-1000, S erial Number 55003. The machine is a feed through stapling machine, designed to fasten casing and stops to either head or leg jambs. Each stapler requires one o perator, who stands facing the machine, at the in-feed side, during operation. A t the in-feed side of each of the stapling machines, a tool box is bolted just a few inches below the chain and sprocket assemblies that are part of the chain c onveyor of the machines. The tool boxes were added to the machines after they we re purchased from the manufacturer. The unguarded opening in front of the tool b ox and the chain and sprocket assemblies measure 15 inches by 24 inches. In addi tion, there are two possible pinch points; one sprocket 26 inches above the floo r and another 29 inches above the floor. As Employee #1 was reaching for the too l box through the opening in the machine, his hand inadvertently came into conta ct with the running chain and sprocket assembly. Employee #1 was taken to San, w here he was hospitalized and treated for an amputated finger.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3999 B
Serious
$22,500
$3,375
Aug 14, 2006
Final
Citation 2, item 1
29 CFR 3328 F
Serious
$8,435
$3,375
Aug 14, 2006
Final
Inspection 125881789 OPENED SEP 21, 2005Closed
Accident · Partial · Safety · 35 employees at the site · Closed Jul 24, 2008
Incident on Jul 29, 2005: Employee's thumb is amputated in saw
At about 11:40 a.m. on July 29, 2005, Employee #1 was using a 10-in. Hitachi Sli de Compound Saw (Model Number C10FSH) to cut stops on door jambs for prehung res idential doors. His left thumb contacted the rotating blade and was partially am putated. Employee #1 had not been trained on the potential hazards and safety ru les for this type of saw.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203 A
Other-than-serious
$185
$150
Jan 27, 2006
Closed
Citation 1, item 2
29 CFR 3203 B
Other-than-serious
$375
$0
Jan 27, 2006
Closed
Citation 2, item 1
29 CFR 3203 A07
Serious
$18,000
$2,700
Jan 27, 2006
Closed
Inspection 120198072 OPENED APR 19, 2005Closed
Accident · Partial · Safety · 100 employees at the site · Closed Sep 9, 2005
Incident on Mar 17, 2005: Employee 's fingers tips amputated by table saw blade
On March 17, 2005, an employee cutting interior door panels on a sliding table s aw, was injured when the panel kicked back pulling the employee's hand into the saw blade amputating the three fingertips of his left hand. The employee was tra nsported to a Medical Center where his fingers were reattached.
No citations from this inspection.
Inspection 119958478 OPENED AUG 14, 1997Closed
Accident · Partial · Safety · 97 employees at the site · Closed Nov 18, 1997
Incident on Aug 1, 1997: Employee's fingers injured in table saw
At approximately 9:30 a.m. on August 1, 1997, Employee #1 was removing a splinte r from the feeder system of a Delta RT40 table saw. He had turned off the feeder motor, but had not turned off the saw, which was still running. Employee #1 was reaching in to clear the splinter when his right hand contacted the blade, ampu tating his middle finger to the first knuckle and lacerating his ring finger. He was taken to the Airport Medical Clinic, and then transferred to Pomona Valley Hospital for treatment. Employee #1 was an experienced worker with over 6 1/2 ye ars with this employer, but he had not followed lockout/blackout procedures. The employer was cited for a serious violation of T8CCR 3314(a, for failure to foll ow lockout procedures, and a general violation of T8CCR 3314(f), for not develop ing written procedures.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203 A
Other-than-serious
$450
$450
Oct 10, 1997
Closed
Citation 1, item 2
29 CFR 3314 F
Other-than-serious
$160
$160
Oct 10, 1997
Closed
Citation 1, item 3
29 CFR 461 C
Other-than-serious
$325
$325
Oct 10, 1997
Closed
Citation 2, item 1
29 CFR 3314 A
Serious
$4,500
$4,500
Oct 10, 1997
Closed
Inspection 125770586 OPENED MAY 21, 1996Closed
Complaint · Complete · Safety · 65 employees at the site · Closed May 28, 1996
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Rialto site logged 34 recordable injuries or illnesses among about 313 workers: 10.1 per 100 full-time workers, against a median of 3.5 for its industry. Those cases cost 122 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Division 02
Rialto · 2018
313
34
4
10.1
3.5
Division 01
Sacramento · 2018
227
16
1
6.9
3.5
Corporate Office/Division 70
Sacramento · 2018
206
19
2
10.4
4.6
Division 76
Stockton · 2018
128
20
5
14.8
4.6
Included with any plan: 4 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.