OSHA SearchOSHA records by employer

American Directional Technology, Inc.: OSHA inspections and violations

Wayne, Oklahoma · Commercial and Service Industry Machinery Manufacturing · NAICS 333319

1inspections
3citation items
$2,856current penalties
May 5, 2015last inspection

OSHA inspectors have visited American Directional Technology, Inc. in Oklahoma one time.

It opened on May 5, 2015 as a planned inspection, in Wayne.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $4,760; today they stand at $2,856, 40% less.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. American Directional Technology, Inc. averages $2,856 across 1 cited inspection.

American Directional Technology, Inc.: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Oklahoma · latest 90 days of OSHA records

53employers cited

Get notified the morning OSHA posts each new citation in Oklahoma: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Oklahoma

Checking a subcontractor, a client or your own company? Watch American Directional Technology, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340612852 OPENED MAY 5, 2015Closed

Planned · Complete · Safety · 40 employees at the site · Closed Oct 15, 2015

29393 State Highway 59, Wayne, OK 73095 · Commercial and Service Industry Machinery Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$2,380$1,428Oct 1, 2015Final
Citation 1, item 2a
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$2,380$1,428Oct 1, 2015Final
Citation 1, item 2b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0Oct 1, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.