Since 1991, OSHA inspectors have visited Amro Fabricating Corporation in California 13 times.
The most recent inspection opened on May 17, 2024 after a complaint, in El Monte.
In all, OSHA issued 34 citation items: 4 serious and 30 other-than-serious.
The proposed penalties came to $76,190; today they stand at $26,780, 65% less.
The rule cited most here is 2350.11 (), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Amro Fabricating Corporation averages $1,575 across 1 cited inspection.
Amro Fabricating Corporation also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,139employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Amro Fabricating Corporation and get notified the morning OSHA posts a new citation for it.
Incident on Mar 8, 2010: Employee amputates finger in bandsaw
At approximately 8:20 a.m. on March 8, 2010, Employee #1 was assisting a coworke r with band saw operations. Employee #1 was making forty-five-degree angle meta l cuts on the "Marvel" Horizontal Band Saw (Model Number 826395). Employee #1 wa s working on cutting the third piece of metal when the automatic feeder's red ho se got stuck on the gear drives. Employee #1 did not deenergize the band saw bef ore he tried to adjust the red hose. As the automatic feeder released, the gear drive pulled in his right glove and hand. Employee #1 amputated his right ring f inger and tore his right thumb nail. The factors leading to the accident were th e gear drive was not guarded and Employee #1 failed to deenergize the band saw p rior to making an adjustment. The Safety Director of AMRO Fabrication Corp. repo rted the injury to the West Covina District Office at 3:45 p.m. on March 8, 2010 . The accident was transferred to the High Hazard Unit, South on March 10, 2010.
Incident on Feb 12, 2005: Employee is injured when struck by falling panel
At approximately 2:30 a.m. on February 12, 2005, Employee #1, a helper and labor er for a manufacturer of metal panels used in the construction of space vehicles , rocket tanks, etc., was assisting in the movement of a large metal fabricated thrust panel. The panel was being moved on a long-wheeled vehicle that was towed behind a Clark forklift when the vehicle struck a stack of pallets. The pallets fell onto the employee's left knee and fractured his tibia which required hospi talization and surgery.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203 B02
Other-than-serious
$485
$0
Aug 11, 2005
Final
Citation 2, item 1
29 CFR 3650 S12
Other-than-serious
$12,150
$375
Aug 11, 2005
Final
Inspection 119825867 OPENED NOV 8, 2000Closed
Accident · Complete · Safety · 88 employees at the site · Closed Nov 5, 2001
Incident on Nov 3, 2000: Employee loses ring finger using hydraulic shear
At approximately 11:00 p.m. on November 3, 2000, Employee # 1, an employee of Am ro Fabricating located in Monte, California, lost his left ring finger while usi ng a hydraulic shear. Two Amro employees witnessed the incident. The model numbe r of the shear was 375R. At the time of the incident, Employee #1 had been worki ng for Amro Fabricating for about seven months. The training records indicated t hat Employee #1 had been trained as a fork lift operator but not as a shear or p ress break operator. Employee #1 was picking up scrap metal behind the pacific h ydraulic shear when one witness asked Employee #1 to cut two pieces of metal on the pacific hydraulic shear, which is capable of shearing 0.75 in. aluminum or 0 .5 in. steel plate. Employee #1 said he had operated the shear before so he said "sure". Employee #1 laid out the cuts on a 14 foot by 6 inch piece of 12 gauge mild steel. Employee #1 then positioned the metal that needed to be cut. Employe e #1 used his left hand with the fingers spread out on the metal piece to be cut . Employee #1 had his foot on the pedal and must have accidentally pushed the pe dal. When the pedal was activated, the hold down clamps came down first to hold the metal in place. Then, the shear cuts the metal. When the hold down clamps ca me down, they smashed his left ring finger and grazed his left little finger. Th e point of operation was guarded by two sets of fixed guards. The set nearest to the point of operation was constructed of expanded metal. The set of guards nea rest to the operator was solid metal. The set of guards nearest to the operator had two sections where the operator was working removed prior to the accident. T he horizontal distance from the remaining set of guards to the hold down clamps was 0.375 of an inch, and the vertical distance from the bottom of the guard to the top of the metal to be cut was 1.5 inches. This distance allowed the operato r to place his fingers in the danger area. Employee #1 was first transported to the Health Care Partners Clinic. After that, he went to the Western Hand Center where he was treated for the amputation of his left ring finger and the lacerati on of the left little finger.
Incident on Jan 19, 1998: Employee's thumb tip amputated in sander/grinder wheel
Employee #1 was using a 6-year-old HDC sander/grinder, serial #3058293, with a 2 0 in. diameter wheel to deburr a piece of metal stock in a machine shop. He was standing in front of the sander, the normal position for deburring work. Employe e #1 was holding the metal stock against the disc wheel when the top one-third t o one-fifth of his left thumb was amputated. He did not use wood stock to push t he metal against the disc. The stock needed to be laid flat on the table provide d.
No citations from this inspection.
Inspection 119847929 OPENED JUN 17, 1993Closed
Accident · Complete · Safety · 50 employees at the site · Closed Aug 31, 2010
Incident on Feb 1, 1993: Employee amputates thumb in press brake machine
AT ABOUT 10:45 A.M. ON FEBRUARY 1, 1993, EMPLOYEE #1 OF AMRD FABRICATING SUFFERE D AN AMPUTATION OF THE FIRST PHALANGE OF HIS LEFT THUMB AFTER IT WAS CAUGHT BETW EEN A FLAT STEEL BAR AND THE FRAME OF A PRESS BRAKE MACHINE. HE WAS BENDING A ME TAL BAR ON A 170-TON PRESS BRAKE MACHINE WHEN IT PARTIALLY SLIPPED OUT OF HIS HA ND AND HIT HIS LEFT THUMB AGAINST THE MACHINE FRAME. THIS MACHINE HAS A FOOT CON TROL LEVER AND THE MOTION OF THE RAM IS CONTROLLED INCH BY INCH BY THE OPERATOR. EMPLOYEE #1 HAD HIS GLOVES ON AT THAT TIME WHICH PREVENTED HIM FROM GETTING A M ORE SERIOUS INJURY. EMPLOYEE #1 WAS INTERVIEWED BRIEFLY ON THE PHONE AND STATED THAT HE WAS FORMING A METAL PART WHEN THE BAR SLIPPED DURING FORMING AND HIT HIS LEFT THUMB. HE WAS TAKEN TO DALTON MEDICAL CLINIC FOR TREATMENT. NO VIOLATIONS WERE OBSERVED RELATIVE TO THE ACCIDENT.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 4975
Other-than-serious
$275
$275
Apr 13, 1993
Closed
Citation 1, item 2
29 CFR 4185
Other-than-serious
$275
$275
Apr 13, 1993
Closed
Inspection 119836914 OPENED NOV 3, 1992Closed
Accident · Partial · Safety · 100 employees at the site · Closed Apr 8, 1994
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the South El Monte site logged 8 recordable injuries or illnesses among about 185 workers: 4.1 per 100 full-time workers, against a median of 1.1 for its industry. Those cases cost 7 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Amro Fabricating Corp
South El Monte · 2025
185
8
1
4.1
1.1
Included with any plan: 1 more yearly log from these sites, back to 2024, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.