OSHA SearchOSHA records by employer

Andreas Valenta: OSHA inspections and violations

Gulfport, Mississippi · Framing Contractors · NAICS 238130

1inspections
4citation items
$7,367current penalties
Jan 19, 2023last inspection

OSHA inspectors have visited Andreas Valenta in Mississippi one time.

It opened on Jan 19, 2023 as a planned inspection, in Gulfport and is still open.

In all, OSHA issued 4 citation items: 4 serious.

The penalties, $7,367 in total, stand where OSHA first set them.

The rule cited most here is 1926.1053 (ladders in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. Andreas Valenta averages $7,367 across 1 cited inspection.

Andreas Valenta: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Want to know if OSHA cites Andreas Valenta again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 346448996 OPENED JAN 19, 2023Open

Planned · Partial · Safety · 7 employees at the site · Open

323 2nd St, Gulfport, MS 39501 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(b)(2) · Scaffolds, general requirements
 Serious$2,679$2,679Mar 27, 2023Final
Citation 1, item 2
29 CFR 1926.501(b)(13) · Fall protection in construction
 Serious$2,679$2,679Mar 27, 2023Final
Citation 1, item 3a
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$2,009$2,009Mar 27, 2023Final
Citation 1, item 3b
29 CFR 1926.1053(b)(4) · Ladders in construction
 Serious$0$0Mar 27, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(4)

(4) Ladders shall be used only for the purpose for which they were designed.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(2)

(2) Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and walkway shall be at least 18 inches (46 cm) wide.

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in Mississippi

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.