OSHA SearchOSHA records by employer

Angel Limon: OSHA inspections and violations

Arlington, Texas · Framing Contractors · NAICS 238130

1inspections
4citation items
$9,779current penalties
Mar 9, 2017last inspection

OSHA inspectors have visited Angel Limon in Texas one time.

It opened on Mar 9, 2017 as a planned inspection, in Arlington.

In all, OSHA issued 4 citation items: 4 serious.

The penalties, $9,779 in total, stand where OSHA first set them.

The rule cited most here is 1926.307 (mechanical power-transmission apparatus), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Angel Limon averages $9,779 across 1 cited inspection.

Angel Limon: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites Angel Limon again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342161239 OPENED MAR 9, 2017Closed

Planned · Partial · Safety · 10 employees at the site · Closed Nov 10, 2020

4205 Snow Goose, Arlington, TX 76005 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Serious$2,173$2,173Apr 13, 2017Final
Citation 1, item 2a
29 CFR 1926.307(d)(1) · Mechanical power-transmission apparatus
 Serious$3,803$3,803Apr 13, 2017Final
Citation 1, item 2b
29 CFR 1926.307(e)(1)(i) · Mechanical power-transmission apparatus
 Serious$0$0Apr 13, 2017Final
Citation 1, item 3
29 CFR 1926.501(b)(13) · Fall protection in construction
 Serious$3,803$3,803Apr 13, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.307 · Mechanical power-transmission apparatus

29 CFR 1926.307(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are 7 feet (2.128 m) or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than 6 ft. 6 in. (1.976 m) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1926.307(e)(1)(i)

(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are 7 feet (2.128 m) or less from the floor level, the guard shall extend to at least 15 inches (38.1 cm) above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches (106.68 cm) or less from the floor, the belt shall be fully enclosed.

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.