OSHA SearchOSHA records by employer

Anjo Construction: OSHA inspections and violations

Fort Stockton, Texas · Framing Contractors · NAICS 238130

2inspections
5citation items
$4,000current penalties
Dec 17, 2018last inspection

Since 2018, OSHA inspectors have visited Anjo Construction in Texas 2 times.

The most recent inspection opened on Dec 17, 2018 to follow up on an earlier case, in Fort Stockton.

In all, OSHA issued 5 citation items: 5 serious.

The proposed penalties came to $6,651; today they stand at $4,000, 40% less.

The rule cited most here is 1926.1053 (ladders in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. Anjo Construction averages $4,000 across 1 cited inspection.

Anjo Construction: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Want to know if OSHA cites Anjo Construction again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 343668166 OPENED DEC 17, 2018Closed

Follow-up · No inspection · Safety · 3 employees at the site · Closed Dec 20, 2018

2792 N. Hwy 18, Fort Stockton, TX 79735 · Framing Contractors · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 343156105 OPENED MAY 10, 2018Closed

Unprogrammed other · Partial · Safety · 3 employees at the site · Closed Apr 18, 2019

2792 N. Hwy 18 Burger King, Fort Stockton, TX 79735 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.453(b)(2)(v) · Aerial lifts
Serious$2,217$1,340Sep 27, 2018Final
Citation 1, item 2a
29 CFR 1926.501(b)(10) · Fall protection in construction
Serious$2,217$1,330Sep 27, 2018Final
Citation 1, item 2b
29 CFR 1926.503(a)(1) · Fall protection training in construction
Serious$0$0Sep 27, 2018Final
Citation 1, item 3a
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$2,217$1,330Sep 27, 2018Final
Citation 1, item 3b
29 CFR 1926.1053(b)(4) · Ladders in construction
Serious$0$0Sep 27, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(4)

(4) Ladders shall be used only for the purpose for which they were designed.

29 CFR 1926.453 · Aerial lifts

29 CFR 1926.453(b)(2)(v)

(v) A body belt shall be worn and a lanyard attached to the boom or basket when working from an aerial lift.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

Other framing contractors employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.