OSHA SearchOSHA records by employer

Anorgas Tortillaria: OSHA inspections and violations

Brownsville, Texas · Tortilla Manufacturing · NAICS 311830

1inspections
3citation items
$2,566current penalties
Dec 20, 2016last inspection

OSHA inspectors have visited Anorgas Tortillaria in Texas one time.

It opened on Dec 20, 2016 as a planned inspection, in Brownsville.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $4,276; today they stand at $2,566, 40% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Anorgas Tortillaria averages $2,566 across 1 cited inspection.

Anorgas Tortillaria: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

401employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Anorgas Tortillaria and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341984987 OPENED DEC 20, 2016Closed

Planned · Complete · Safety · 3 employees at the site · Closed Feb 25, 2019

900 N. Iowa Ave, Brownsville, TX 78521 · Tortilla Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$2,138$1,283Jan 12, 2017Final
Citation 1, item 1b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Jan 12, 2017Final
Citation 1, item 2
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Serious$2,138$1,283Jan 12, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(e)(1)(i)

(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.

29 CFR 1910.219(f)(3)

(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.

Other tortilla manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.