OSHA SearchOSHA records by employer

Antonio Alonzo: OSHA inspections and violations

Newnan, Georgia · Framing Contractors · NAICS 238130

2inspections
5citation items
$22,914current penalties
May 23, 2018last inspection

Since 2018, OSHA inspectors have visited Antonio Alonzo in Georgia 2 times.

The most recent inspection opened on May 23, 2018 as a planned inspection, in Newnan.

In all, OSHA issued 5 citation items: 5 serious.

The penalties, $22,914 in total, stand where OSHA first set them.

The rule cited most here is 1926.501 (fall protection in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Antonio Alonzo averages $11,457 across 2 cited inspections.

Antonio Alonzo: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

142employers cited

27 of them in the same industry

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Antonio Alonzo and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343180840 OPENED MAY 23, 2018Closed

Planned · Partial · Safety · 11 employees at the site · Closed Apr 24, 2023

38 Boulder Bend, Newnan, GA 30265 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
Serious$5,174$5,174Nov 19, 2018Final
Citation 1, item 2
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$3,696$3,696Nov 19, 2018Final

Inspection 343010997 OPENED MAR 8, 2018Closed

Planned · Partial · Safety · 11 employees at the site · Closed Oct 17, 2022

(lot #577) 15 Boulder Bend, Newnan, GA 30265 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.300(b)(2) · Tools—Hand and Power: general requirements
Serious$3,696$3,696Aug 21, 2018Final
Citation 1, item 2
29 CFR 1926.304(d) · Woodworking tools
Serious$5,174$5,174Aug 21, 2018Final
Citation 1, item 3
29 CFR 1926.501(b)(13) · Fall protection in construction
Serious$5,174$5,174Aug 21, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.300 · Tools—Hand and Power: general requirements

29 CFR 1926.300(b)(2)

(2) Belts, gears, shafts, pulleys, sprockets, spindles, drums, fly wheels, chains, or other reciprocating, rotating or moving parts of equipment shall be guarded if such parts are exposed to contact by employees or otherwise create a hazard. Guarding shall meet the requirements as set forth in American National Standards Institute, B15.1-1953 (R1958), Safety Code for Mechanical Power-Transmission Apparatus.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(d)

(d) Guarding. All portable, power-driven circular saws shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to the covering position.

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.