OSHA SearchOSHA records by employer

Architectural Millwork LLC: OSHA inspections and violations

Salt Lake City, Utah · Other Millwork (including Flooring) · NAICS 321918

1inspections
6citation items
$1,500current penalties
Mar 19, 2018last inspection

OSHA inspectors have visited Architectural Millwork LLC in Utah one time.

It opened on Mar 19, 2018 as a planned inspection, in Salt Lake City.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $3,000; today they stand at $1,500, 50% less.

The rule cited most here is 1910.95 (noise), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Architectural Millwork LLC averages $1,500 across 1 cited inspection.

Architectural Millwork LLC: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Want to know if OSHA cites Architectural Millwork LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 343024774 OPENED MAR 19, 2018Closed

Planned · Partial · Health · 8 employees at the site · Closed Jul 9, 2018

630 W 1700 S, Salt Lake City, UT 84104 · Other Millwork (including Flooring) · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a Serious$1,500$750Apr 10, 2018Final
Citation 1, item 1b Serious$0$0Apr 10, 2018Final
Citation 1, item 2a
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$750$375Apr 10, 2018Final
Citation 1, item 2b
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
 Serious$0$0Apr 10, 2018Final
Citation 1, item 3a
29 CFR 1910.213(h)(1) · Woodworking machinery
 Serious$750$375Apr 10, 2018Final
Citation 1, item 3b
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
 Serious$0$0Apr 10, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(h)(1)

(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.95 · Noise

Other other millwork (including flooring) employers in Utah

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.