OSHA SearchOSHA records by employer

Armstrong Bros. Plumbing: OSHA inspections and violations

Sarasota, Florida · Plumbing Fixture Fitting and Trim Manufacturing · NAICS 332913

1inspections
2citation items
$5,358current penalties
Aug 9, 2023last inspection

OSHA inspectors have visited Armstrong Bros. Plumbing in Florida one time.

It opened on Aug 9, 2023 on a referral, in Sarasota.

In all, OSHA issued 2 citation items: 2 serious.

The proposed penalties came to $8,930; today they stand at $5,358, 40% less.

The rule cited most here is 1910.243 (guarding of portable powered tools), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Armstrong Bros. Plumbing averages $5,358 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Armstrong Bros. Plumbing: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Florida · latest 90 days of OSHA records

321employers cited

Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Florida

Checking a subcontractor, a client or your own company? Watch Armstrong Bros. Plumbing and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346893118 OPENED AUG 9, 2023Closed

Referral · Partial · Safety · 11 employees at the site · Closed Dec 4, 2024

1411 Quail Dr, Sarasota, FL 34231 · Plumbing Fixture Fitting and Trim Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.243(a)(2)(ii) · Guarding of portable powered tools
Serious$4,465$2,679Nov 7, 2023Final
Citation 1, item 2
29 CFR 1910.243(c)(3) · Guarding of portable powered tools
Serious$4,465$2,679Nov 7, 2023Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Aug 1, 2023, Sarasota: Hospitalization · cuts, lacerations · upper and lower limb(s)

An employee was conducting grinding operations on a cast iron pipe using a portable grinder. The grinder kicked back and struck the employee's right wrist and knee. The employee sustained a laceration to his right knee and a cut to his right wrist that injured an artery and a tendon.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.243 · Guarding of portable powered tools

29 CFR 1910.243(a)(2)(ii)

(ii) All hand-held powered drills, tappers, fastener drivers, horizontal, vertical, and angle grinders with wheels greater than 2 inches in diameter, disc sanders with discs greater than 2 inches in diameter, belt sanders, reciprocating saws, saber, scroll, and jig saws with blade shanks greater than a nominal one-fourth inch, and other similarly operating powered tools shall be equipped with a constant pressure switch or control, and may have a lock-on control provided that turnoff can be accomplished by a single motion of the same finger or fingers that turn it on.

29 CFR 1910.243(c)(3)

(3) Vertical portable grinders. Safety guards used on machines known as right angle head or vertical portable grinders shall have a maximum exposure angle of 180°, and the guard shall be so located so as to be between the operator and the wheel during use. Adjustment of guard shall be such that pieces of an accidentally broken wheel will be deflected away from the operator. (See Figure P-4.)

Other plumbing fixture fitting and trim manufacturing employers in Florida

Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.