OSHA SearchOSHA records by employer

Army National Guard: OSHA inspections and violations

Salem, Oregon · Other Nonscheduled Air Transportation · NAICS 481219

2inspections
6citation items
$0current penalties
Apr 12, 2023last inspection

Army National Guard has 2 OSHA inspections on record in Oregon, the first in 2015.

OSHA's last visit started on Apr 12, 2023 as a planned inspection, in Salem.

Across those inspections OSHA issued 6 citation items: 5 serious and 1 other-than-serious.

OSHA did not attach a penalty to any of these citations.

For context, across all transportation and warehousing employers the median penalty per cited inspection since 2015 is $2,416. Army National Guard averages $0 over 2 cited inspections in that time.

Army National Guard: OSHA citation items per year, 2015 to 2023
Citation items per year, by inspection date.

Oregon · latest 90 days of OSHA records

391employers cited

Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Oregon

Checking a subcontractor, a client or your own company? Watch Army National Guard and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346630056 OPENED APR 12, 2023Closed

Planned · Complete · Safety · Federal government · 45 employees at the site · Closed May 22, 2023

1921 Turner Rd S.e., Salem, OR 97302 · Other Nonscheduled Air Transportation · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$0$0Apr 19, 2023Final
Citation 1, item 2
29 CFR 1910.213(i)(1) · Woodworking machinery
Serious$0$0Apr 19, 2023Final
Citation 2, item 1
29 CFR 1910.303(b)(1)(viii) · Electrical equipment, general requirements
Other-than-serious$0$0Apr 19, 2023Final

Inspection 340203470 OPENED JAN 22, 2015Closed

Planned · Complete · Safety · Federal government · 40 employees at the site · Closed Jul 30, 2015

1921 Turner Rd S.e., Salem, OR 97302 · Other Nonscheduled Air Transportation · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.23(c)(1) · Guarding floor and wall openings and holes
Serious$0$0Apr 13, 2015Final
Citation 1, item 2
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0Apr 13, 2015Final
Citation 1, item 3
29 CFR 1910.253(e)(1) · Gas welding and cutting
Serious$0$0Apr 13, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(i)(1)

(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.23 · Guarding floor and wall openings and holes

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.303 · Electrical equipment, general requirements

Other other nonscheduled air transportation employers in Oregon

Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.