OSHA SearchOSHA records by employer

Arrow-Tech, Inc.: OSHA inspections and violations

Rolla, North Dakota · Other Measuring and Controlling Device Manufacturing · NAICS 334519

1inspections
3citation items
$3,622current penalties
Feb 1, 2017last inspection

OSHA inspectors have visited Arrow-Tech, Inc. in North Dakota one time.

It opened on Feb 1, 2017 as a planned inspection, in Rolla.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $7,243; today they stand at $3,622, 50% less.

The rule cited most here is 1910.212 (machine guarding), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Arrow-Tech, Inc. averages $3,622 across 1 cited inspection.

Arrow-Tech, Inc.: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites Arrow-Tech, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342069994 OPENED FEB 1, 2017Closed

Planned · Complete · Safety · 19 employees at the site · Closed May 30, 2017

417 Main Avenue West, Rolla, ND 58367 · Other Measuring and Controlling Device Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$5,070$2,535Mar 6, 2017Final
Citation 1, item 1b
29 CFR 1910.212(a)(3)(ii) · Machine guarding
 Serious$0$0Mar 6, 2017Final
Citation 1, item 2
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$2,173$1,087Mar 6, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.