Arrowhead Products Corporation: OSHA inspections and violations
Los Alamitos, California · Other Aircraft Parts and Auxiliary Equipment Manufacturing · NAICS 336413
18inspections
23citation items
$104,930current penalties
Jan 5, 2022last inspection
Since 1995, OSHA inspectors have visited Arrowhead Products Corporation in California 18 times.
The most recent inspection opened on Jan 5, 2022 after an accident, in Los Alamitos.
In all, OSHA issued 23 citation items: 10 serious and 13 other-than-serious.
The proposed penalties came to $154,093; today they stand at $104,930, 32% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Arrowhead Products Corporation averages $14,199 across 5 cited inspections.
Arrowhead Products Corporation also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,139employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Arrowhead Products Corporation and get notified the morning OSHA posts a new citation for it.
Incident on Dec 4, 2021: Employee fractures arm when struck by metal
At 8:05 a.m. on December 4, 2021, an employee was working as a tool maker at a large aerospace parts manufacturing plant machine shop area. A coworker in the maintenance department asked the employee to design and create an aluminum bracket for a roller machine which would hold the bearings. The employee was using a Sharp Model VH3 Vertical & Horizontal Milling Machine to bore a hole in the aluminum. Before attempting to drill the hole, the employee was attaching the 11-inch by 8-inch by 1-inch piece of aluminum to a clamp. The employee had his hand on the clamp, approximately 9 inches from the bit. When the bit broke through the stock, the metal slipped from the clamp and slid up the bit striking the employee's left arm. The employee had failed to tighten the holding clamp sufficiently and failed to correctly adjust the speed selector, which was set high at 1,350 revolultions per mimute (RPM). The speed should have been set no higher than 1,100 RPM for that bit and material. The employee fractured his left arm and was treated by local Fire Department Paramedics onsite. The employee was transported to a medical center by a coworker (Supervisor), where he was admitted for further treatment.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 342(A)
Other-than-serious
$5,000
$3,750
Apr 7, 2022
Final
Citation 1, item 2
29 CFR 3203(A)(8)
Other-than-serious
$0
$0
Apr 7, 2022
Final
Inspection 343177168 OPENED MAY 22, 2018Closed
Accident · Partial · Safety · 1,000 employees at the site · Closed Dec 10, 2018
Incident on Apr 12, 2018: Employee's left hand is crushed in hydraulic pipe bending ma
At 9:00 a.m. on April 12, 2018, an employee was operating a hydraulic pipe bending machine. He was placing a 3 inch pipe into the machine when the clamp closed inadvertently on his left hand, crushing his left little finger and left middle finger. Surgery was performed as an out-patient but he was not admitted and was sent home after about 13 hours in the hospital.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203(A)(4)
Other-than-serious
$1,013
$700
Aug 16, 2018
Final
Citation 2, item 1
29 CFR 4184(B)
Serious
$13,500
$8,435
Aug 16, 2018
Final
Inspection 342902905 OPENED FEB 5, 2018Closed
Complaint · Partial · Safety · 100 employees at the site · Closed Dec 4, 2018
Incident on Apr 16, 2012: Employee fractures leg when he strikes fence post
At 4:15 p.m. on April 16, 2012, Employee #1 was operating an electric cart (Tayl or-Dunn M4428, Serial Number 161453, Model Number L2-48) when his left knee stru ck a vertical chain link fence post. Employee #1 was a full-time permanent emplo yee. The employer is an aerospace ducting system and components manufacturing. T he incident occurred at the secondary employer's warehouse area in Westminster, California. Employee #1 sustained a right leg fracture and he was transported to Los Alamitos Medical Center in Los Alamitos, where he was treated for his injur ies and hospitalized.
No citations from this inspection.
Inspection 315526046 OPENED SEP 21, 2011Closed
Accident · Partial · Safety · 589 employees at the site · Closed Nov 2, 2011
Accident · Partial · Safety · 500 employees at the site · Closed Aug 31, 2011
4411 Katella Ave, Los Alamitos, CA 90720 · Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing · OSHA's record · Phone and website on Google Maps
Incident on Sep 29, 2010: Employee gets finger caught in punch press machine
On September 29, 2010 Employee #1, a punch press operator of Arrowhead Products was working on a punch press manufactured by Kenco, model 8 103, s/n G 791 364. The punch press had a finger type barrier guard with the "fingers" in an upward position. With the guard in an upward position no protection was afforded employ ees who used this punch press. Employee #1 said she did not know what the finger type guard was for or that it was a guard. She was simply told to watch her fin gers. Employee #1 was running a 2 inch strip of metal through the Kenco punch pr ess and punching out triangle shaped pieces. The strip ran under a sleeve and wa s held by a clamp. With her right hand on the strip, she slid it across the flat work surface, from right to left, when it suddenly moved quickly; her hand went under the point of operation. At the same time she pushed the pedal and the pun ch came down amputating her right index finger tip and crushing her right middle finger.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 2
29 CFR 4203 B
Other-than-serious
$750
$375
Dec 23, 2010
Final
Citation 2, item 1
29 CFR 4206 A
Serious
$18,000
$18,000
Dec 23, 2010
Final
Inspection 313167850 OPENED OCT 28, 2010Closed
Accident · Partial · Safety · 500 employees at the site · Closed Aug 31, 2011
Incident on Oct 13, 2010: Employee falls from chair and fractures leg
On October 13, 2010, Employee #1, a punch press operator, was working in Departm ent Number 9426, also known as the components area. Her duties included issuing supplies and personal protective equipment to employees requesting them. Employe e #1 typically used a ladder to reach supplies that were out of her reach. Howev er, on this day, the ladder was missing from the area, so she decided to use an old chair. She climbed on top of the old chair to reach a crown and ratchet for a face shield located on top of a cabinet that was approximately 60 inches tall. The chair seat height was measured at 17.5 in. from the floor. One of the front legs on the left side of the chair was wobbly. A screw had been tightened a cou ple of months earlier to stabilize the leg of the chair, but it had become wobbl y again. As Employee #1 stood on the chair, the chair became unstable and fell f orward, which caused her to fall. She struck the ground and sustained a fracture d lower leg. Employee #1 was transported to a medical center, where she underwen t treatment for fractures to her fibula and tibia. After receiving the medical c are, she was hospitalized for a period of seven days.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 342 A
Other-than-serious
$5,000
$5,000
Jan 12, 2011
Closed
Citation 1, item 2
29 CFR 3203 A
Other-than-serious
$560
$560
Jan 12, 2011
Closed
Inspection 309302610 OPENED AUG 8, 2008Closed
Complaint · Partial · Safety · 550 employees at the site · Closed Jan 14, 2010
Incident on Nov 20, 1995: Employee's arm fractured when pulled into lathe
Employee #1, who worked for a manufacturer of aerospace products, was using a ra g to clean the spin block on spin lathe #3376. He did not stop the machinery, an d the rag became caught on the block. Employee #1's left hand was pulled into th e lathe and he sustained a fractured arm. The accident occurred because Employee #1 did not stop the machine.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203 A02
Other-than-serious
$400
$0
May 3, 1996
Final
Citation 1, item 2
29 CFR 3314 F
Other-than-serious
$200
$0
May 3, 1996
Final
Citation 2, item 1
29 CFR 3314 A
Serious
$5,000
$5,000
Apr 30, 1996
Final
Inspection 120158910 OPENED JAN 30, 1995Closed
Accident · Partial · Safety · 450 employees at the site · Closed May 15, 1996
Incident on Jan 17, 1995: Employee's thumb amputated by clamp
Employee #1 was operating a tool forming machine called a 5-CP, model #3301, man ufactured by Leonard Precision Products. The operation consists of the operator placing a 3 inch diameter metal cylinder into a set of jaws that clamp the cylin der in order for the machine to flare the ends of the cylinder. The operator has to hold the cylinder in place with her thumb until the jaws clamp around the cy linder. Her thumb was outside the cylinder and was amputated by the closing jaws .
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 4184 B
Serious
$5,000
$5,000
Mar 3, 1995
Final
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Los Alamitos site logged 3 recordable injuries or illnesses among about 713 workers: 0.4 per 100 full-time workers, against a median of 1.1 for its industry. Those cases cost 61 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Arrowhead Products
Los Alamitos · 2025
713
3
1
0.4
1.1
06-350547944-9
Los Alamitos · 2024
650
9
4
1.2
1.1
Included with any plan: 7 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.