OSHA SearchOSHA records by employer

Ascend Performance Materials Texas, Inc.: OSHA inspections and violations

Alvin, Texas · All Other Basic Organic Chemical Manufacturing · NAICS 325199

3inspections
2citation items
$27,306current penalties
Mar 31, 2021last inspection

Ascend Performance Materials Texas, Inc. has 3 OSHA inspections on record in Texas, the first in 2016.

OSHA's last visit started on Mar 31, 2021, in Alvin.

Across those inspections OSHA issued 2 citation items: 2 other-than-serious.

OSHA proposed $27,306 in penalties and the amount has not been reduced.

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Ascend Performance Materials Texas, Inc. averages $27,306 over 1 cited inspection in that time.

It reported 1 severe injury to OSHA since 2015.

Ascend Performance Materials Texas, Inc.: OSHA citation items per year, 2016 to 2021
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

393employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Ascend Performance Materials Texas, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345225114 OPENED MAR 31, 2021Closed

Programmed other · Partial · Safety · 500 employees at the site · Closed Dec 10, 2021

Fm 2917 Rd., Alvin, TX 77511 · All Other Basic Organic Chemical Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.119(f)(4) · Process safety management
Other-than-serious$13,653$13,653Sep 3, 2021Final
Citation 1, item 2
29 CFR 1910.132(a) · Personal protective equipment, general requirements
Other-than-serious$13,653$13,653Sep 3, 2021Final

Inspection 343194981 OPENED MAY 31, 2018Closed

Referral · Partial · Health · 602 employees at the site · Closed Oct 17, 2018

Fm 2917, Alvin, TX 77512 · All Other Basic Organic Chemical Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on May 24, 2018: Employee sustains back laceration when container ruptures

At 8:30 a.m. on May 24, 2018, Employee #1 was in charge of setting up a booth representing the control laboratory for a safety day event at the plant, which involved approximately 1,000 employees, visitors, and vendors. Employee #1 wanted to have a fog effect at the booth to attract visitors. Employee #1 made plans to have a coworker #1 get dry ice for the effect. When coworker #1 could not get dry ice, coworker #1 asked coworker #2 to get liquid nitrogen from an adjacent lab. Even though the control lab does not use nitrogen, Employee #1 knew it was available at the development lab. A container designed for high vapor pressure volatile petroleum hydrocarbons was filled with liquid nitrogen for use in generating a fog effect at the control lab booth at safety day. The container, a stainless steel container rated for a maximum pressure of 150 psi of liquid, not gases, was placed under the display table at a safety day event by coworker #2. It ruptured after 20-30 minutes of exposure to the heat outdoors causing flying debris to strike Employee #1, who suffered a deep laceration in her back. There was no pressure relief device on the container. container.

No citations from this inspection.

Inspection 341896306 OPENED OCT 28, 2016Closed

Complaint · Partial · Health · 600 employees at the site · Closed Jan 23, 2017

Fm 2917 Rd., Alvin, TX 77511 · Other Basic Inorganic Chemical Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Apr 9, 2021, Alvin: Hospitalization · third or fourth degree heat (thermal) burns · lower leg(s)

An employee walked into a location in a tank containment dike where part of a grate had been removed, causing his right leg to sink in hot wash water up to his knee. The water filled his rubber boot and he suffered second- and third-degree burns below the knee.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.119 · Process safety management

29 CFR 1910.119(f)(4)

(4) The employer shall develop and implement safe work practices to provide for the control of hazards during operations such as lockout/tagout; confined space entry; opening process equipment or piping; and control over entrance into a facility by maintenance, contractor, laboratory, or other support personnel. These safe work practices shall apply to employees and contractor employees.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(a)

(a) Application. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.

Other all other basic organic chemical manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.