OSHA SearchOSHA records by employer

Ashley Oil, Inc.: OSHA inspections and violations

Casey, Illinois · Drilling Oil and Gas Wells · NAICS 213111

1inspections
3citation items
$0current penalties
Dec 27, 2019last inspection

OSHA has inspected Ashley Oil, Inc. once in Illinois.

The inspection began on Dec 27, 2019 after a complaint, in Casey.

That inspection ended with 3 citation items: 3 serious.

None of the citations carried a penalty.

Belts, pulleys and power-transmission parts comes up most often in these citations: 2 items under 1910.219.

How that compares: the median penalty per cited inspection for mining and oil and gas employers since 2015 is $2,883, and Ashley Oil, Inc. averages $0 (1 cited inspection).

Ashley Oil, Inc.: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Illinois · latest 90 days of OSHA records

426employers cited

Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Illinois

Checking a subcontractor, a client or your own company? Watch Ashley Oil, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344703780 OPENED DEC 27, 2019Closed

Complaint · Partial · Safety · 7 employees at the site · Closed Aug 25, 2020

508 Deere Run Lane, Casey, IL 62420 · Drilling Oil and Gas Wells · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$0$0May 20, 2020Final
Citation 1, item 2a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$0$0May 20, 2020Final
Citation 1, item 2b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0May 20, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(e)(1)(i)

(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.

Other drilling oil and gas wells employers in Illinois

Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.