Atlantic Building Systems LLC: OSHA inspections and violations
Englewood, Colorado · Iron and Steel Mills and Ferroalloy Manufacturing · NAICS 331110
4inspections
7citation items
$6,356current penalties
Aug 7, 2025last inspection
Since 2021, OSHA inspectors have visited Atlantic Building Systems LLC in Colorado 4 times.
The most recent inspection opened on Aug 7, 2025 on a referral, in Englewood.
In all, OSHA issued 7 citation items: 7 serious.
The proposed penalties came to $10,593; today they stand at $6,356, 40% less.
The rule cited most here is 1910.95 (noise), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Atlantic Building Systems LLC averages $3,178 across 2 cited inspections.
Atlantic Building Systems LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Colorado · latest 90 days of OSHA records
132employers cited
Get notified the morning OSHA posts each new citation in Colorado: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Atlantic Building Systems LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Englewood site logged 7 recordable injuries or illnesses among about 25 workers: 28.0 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 33 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Windermere Plant
Englewood · 2021
25
7
3
28.0
3.6
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(iii) Protection from arc welding rays. Where the work permits, the welder should be enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or shall be enclosed with noncombustible screens similarly painted. Booths and screens shall permit circulation of air at floor level. Workers or other persons adjacent to the welding areas shall be protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles.
(5) Shields. The hazard of flying sparks shall be, wherever practical, eliminated by installing a shield guard of safety glass or suitable fire-resistant plastic at the point of operation. Additional shields or curtains shall be installed as necessary to protect passing persons from flying sparks. (See § 1910.252(b)(2)(i)(C) of this part.)
(c) Hearing conservation program. (1) The employer shall administer a continuing, effective hearing conservation program, as described in paragraphs (c) through (o) of this section, whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level (TWA) of 85 decibels measured on the A scale (slow response) or, equivalently, a dose of fifty percent. For purposes of the hearing conservation program, employee noise exposures shall be computed in accordance with appendix A and Table G-16a, and without regard to any attenuation provided by the use of personal protective equipment.
Other iron and steel mills and ferroalloy manufacturing employers in Colorado
Alert subscribers get notified of each newly cited employer in Colorado the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.