Wichita, Kansas · Other Aircraft Parts and Auxiliary Equipment Manufacturing · NAICS 336413
3inspections
3citation items
$9,975current penalties
Feb 24, 2016last inspection
Since 2009, OSHA inspectors have visited Atlas Aerospace in Kansas 3 times.
The most recent inspection opened on Feb 24, 2016 on a referral, in Wichita.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $18,250; today they stand at $9,975, 45% less.
The rule cited most here is 1910.147 (lockout/tagout), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Atlas Aerospace averages $7,000 across 1 cited inspection.
Atlas Aerospace also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Kansas · latest 90 days of OSHA records
43employers cited
Get notified the morning OSHA posts each new citation in Kansas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Wichita site logged 12 recordable injuries or illnesses among about 717 workers: 1.7 per 100 full-time workers, against a median of 2.3 for its industry. Those cases cost 7 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Atlas Aerospace
Wichita · 2024
717
12
3
1.7
2.3
Atlas Aerospace, LLC
Wichita · 2023
705
26
6
3.3
1.1
Included with any plan: 2 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee had positioned a 12-foot, 144-pound stainless steel round bar on a cantilever arm from the material storage rack. While the employee was pulling the bar into position, it dropped 12 inches off the arm to the ground, crushing two fingers on the employee's right hand. One of the employee's fingers had closed fractures, and the second finger had open fractures, resulting in an amputation…
While an employee was trying to clear a jam on the brake press, the press activated, injuring both of the employee's hands and amputating a right-hand finger.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
29 CFR 1910.147(d)(4)(i)
(4) Lockout or tagout device application. (i) Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Other other aircraft parts and auxiliary equipment manufacturing employers in Kansas
Alert subscribers get notified of each newly cited employer in Kansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.