OSHA SearchOSHA records by employer

Automatic SMP: OSHA inspections and violations

Decatur, Alabama · Precision Turned Product Manufacturing · NAICS 332721

1inspections
6citation items
$25,000current penalties
Jun 14, 2017last inspection

Automatic SMP has one OSHA inspection on record in Alabama.

OSHA opened it on Jun 14, 2017 on a referral, in Decatur.

From that inspection OSHA issued 6 citation items: 5 serious and 1 other-than-serious.

OSHA proposed $36,214 in penalties. After settlements and reviews the total is $25,000, down 31%.

Most often, OSHA cited 1910.147, lockout/tagout (3 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Automatic SMP averages $25,000 over 1 cited inspection in that time.

Automatic SMP also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Automatic SMP: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites Automatic SMP again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342399706 OPENED JUN 14, 2017Closed

Referral · Partial · Safety · 105 employees at the site · Closed Feb 2, 2018

709 2nd Avenue Se, Decatur, AL 35601 · Precision Turned Product Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Jun 8, 2017: Employee suffers from amputation

At 10:30 p.m. on June 8, 2017, an employee in the core department operating a slotter machine had a nut get jammed in the loading chute. The employee reached in and removed the jammed nut with his finger. The loading cylinder engaged and caught the tip of the employee's finger between the loading chute guard and the loading clinger resulting in an amputation to the end of the finger. finger.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.22(a)(1) · Walking-working surfaces
Serious$7,243$5,000Jul 14, 2017Final
Citation 1, item 2a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$10,864$7,500Jul 14, 2017Final
Citation 1, item 2b
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$0$0Jul 14, 2017Final
Citation 1, item 3
29 CFR 1910.212(a)(1) · Machine guarding
Serious$10,864$7,500Jul 14, 2017Final
Citation 1, item 4
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$7,243$5,000Jul 14, 2017Final
Citation 2, item 1
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Other-than-serious$0$0Jul 14, 2017Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2021, the Decatur site logged 0 recordable injuries or illnesses among about 56 workers: 0.0 per 100 full-time workers, against a median of 2.7 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
Automatic SMP
Decatur · 2021
56 000.02.7

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Jun 8, 2017, Decatur: Hospitalization, amputation · amputations · finger(s), fingernail(s), unspecified

An employee was attempting to clear a jam on a slotting machine when it partially amputated his right index finger.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

29 CFR 1910.147(c)(7)(i)

(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:

29 CFR 1910.212 · Machine guarding

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.22 · Walking-working surfaces

Other precision turned product manufacturing employers in Alabama

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.