OSHA has inspected Avanti Corp 2 times in Tennessee since 2016.
The latest one began on May 29, 2018 as a planned inspection, in Clarksville.
Those inspections ended with 7 citation items: 4 serious and 3 other-than-serious.
Penalties were first proposed at $3,150 and still stand at $3,150.
Electrical wiring methods comes up most often in these citations: 3 items under 1910.305.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,875, and Avanti Corp averages $3,150 (1 cited inspection).
Avanti Corp also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Tennessee · latest 90 days of OSHA records
344employers cited
Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Clarksville site logged 0 recordable injuries or illnesses among about 53 workers: 0.0 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Avanti
Clarksville · 2025
53
0
0
0.0
2.6
Avanti Corporation
Clarksville · 2022
58
0
0
0.0
2.6
Included with any plan: 3 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(b) Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.303 · Electrical equipment, general requirements
Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.