The inspection began on Jan 28, 2020 on a referral, in Schertz.
That inspection ended with 5 citation items: 5 serious.
Penalties were first proposed at $31,230 and now stand at $18,738, 40% lower after settlements or reviews.
Safeguards for personnel protection comes up most often in these citations: 2 items under 1910.335.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Axel Royal, LLC averages $18,738 (1 cited inspection).
Axel Royal, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
393employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Jan 24, 2020: Employee incurs burns and eye damage in breaker arc flash
At 4:30 p.m. on January 24, 2020, an employee was testing a 480 volt breaker to a furnace to determine if it was the cause of the furnace not running. The employee unscrewed conductor wires off the breaker lug when the wires contacted each other and arc flashed. The employee incurred burns to his hands and left eye causing a temporarily clouded eye. The employee was hospitalized and is still experiencing a cloudy eye.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Schertz site logged 1 recordable injury or illness among about 32 workers: 3.0 per 100 full-time workers, against a median of 0.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Axel Royal
Schertz · 2023
32
1
0
3.0
0.6
Axel Royal TX
Schertz · 2020
28
3
1
9.7
0.6
Included with any plan: 3 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jan 24, 2020, Schertz: Hospitalization · first degree electrical burns · hand(s), unspecified
A maintenance employee was attempting to repair/replace an inoperative breaker to a hot oil furnace when an electrical arc flash occurred, causing first degree burns to the employee's hands.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(f)(2)
(2) Services, feeders, and branch circuits. Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident.
(a) General. Safety-related work practices shall be employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work is performed near or on equipment or circuits which are or may be energized. The specific safety-related work practices shall be consistent with the nature and extent of the associated electrical hazards.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.