OSHA has inspected Axis Pipe and Tube, Inc. 7 times in Texas since 2016.
The latest one began on Jan 26, 2023 to follow up on an earlier case, in Bryan.
Those inspections ended with 19 citation items: 13 serious, 1 repeat and 5 other-than-serious.
Penalties were first proposed at $136,775 and now stand at $104,125, 24% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 8 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Axis Pipe and Tube, Inc. averages $17,354 (6 cited inspections).
1 inspection on this page followed a fatal incident.
Axis Pipe and Tube, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Jan 29, 2021 (fatal): Employee is killed when caught in bevelar machine
At 9:30 a.m. on January 29, 2021, an employee was likely cleaning and removing the metal scarf from around a beveler machine. The machine was activated and the employee was pulled inside of machine, killing him.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Bryan site logged 7 recordable injuries or illnesses among about 368 workers: 1.4 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 32 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Axis Pipe and Tube
Bryan · 2025
368
7
3
1.4
3.6
Included with any plan: 7 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 4 reports on file.
Dec 13, 2024, Bryan: Hospitalization · closed trauma involving internal organs, major blood vessels · multiple trunk locations
An employee was standing near a rack of pipes while waiting for a forklift driver to deliver more pipes. The driver was turning into the aisle when three pipes slipped off the forks and onto the ground. One pipe bounced and struck the employee, resulting in a facial fracture, broken rib, punctured lung, and spleen laceration.
An employee was operating a gantry crane to move a coil to their bay. When he set the coil down, the crane became stuck inside of the coil. As he pushed the down button, the hook swung back, crushing his left hand between the hook and coil. The employee sustained two finger fractures that involved muscle and tendon injuries. The incident occurred during training.
Mar 24, 2022, Bryan: Hospitalization · fractures · foot(feet) and leg(s), unspecified
An employee was assisting a forklift operator with loading a truck and placing chocks on the wood boards for loading. While the forklift operator lifted a pipe, a group of pipes rolled back in place, but a single metal pipe was held at the tip of the forks and slipped out of place. The pipe fell on the floor and bounced toward the employee, striking and crushing his left foot and leg, which resulted in fractures.
An employee was helping a driver tighten down a load on a truck. A wooden 2-by-4 struck the employee's left ring finger, causing an open displaced fracture. The finger was medically amputated from the third knuckle up.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(2) Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.
(iii) The employer shall document the basis for determining that all hazards in a permit space have been eliminated, through a certification that contains the date, the location of the space, and the signature of the person making the determination. The certification shall be made available to each employee entering the space or to that employee's authorized representative.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.