OSHA has inspected B-Tec Solutions, Inc. 4 times in Pennsylvania since 2009.
The latest one began on Apr 4, 2025 as a planned inspection, in Croydon.
Those inspections ended with 10 citation items: 9 serious and 1 other-than-serious.
Penalties were first proposed at $17,448 and now stand at $13,048, 25% lower after settlements or reviews.
Noise comes up most often in these citations: 3 items under 1910.95.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and B-Tec Solutions, Inc. averages $5,065 (1 cited inspection).
B-Tec Solutions, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
300employers cited
7 of them in the same industry
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Croydon site logged 5 recordable injuries or illnesses among about 88 workers: 5.5 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 54 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
B-Tec Solutions, Inc.
Croydon · 2025
88
5
2
5.5
2.7
B-Tec Solutions, Inc
Croydon · 2024
97
1
0
0.9
2.7
Included with any plan: 4 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(6) Workplace labeling. Except as provided in paragraphs (f)(7) and (f)(8) of this section, the employer shall ensure that each container of hazardous chemicals in the workplace is labeled, tagged or marked with either:
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.