OSHA SearchOSHA records by employer

Baeza Feeds LLC: OSHA inspections and violations

Marfa, Texas · Other Animal Food Manufacturing · NAICS 311119

1inspections
6citation items
$16,075current penalties
Aug 27, 2018last inspection

Baeza Feeds LLC has one OSHA inspection on record in Texas.

OSHA opened it on Aug 27, 2018 after a complaint, in Marfa.

From that inspection OSHA issued 6 citation items: 6 serious.

OSHA proposed $16,075 in penalties and the amount has not been reduced.

Most often, OSHA cited 1910.219, belts, pulleys and power-transmission parts (2 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,873. Baeza Feeds LLC averages $16,075 over 1 cited inspection in that time.

Baeza Feeds LLC: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Baeza Feeds LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343421418 OPENED AUG 27, 2018Closed

Complaint · Partial · Health · 2 employees at the site · Closed Aug 10, 2021

305 W. El Paso St., Marfa, TX 79843 · Other Animal Food Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.22(a)(1) · Walking-working surfaces
 Serious$3,326$3,326Jan 9, 2019Final
Citation 1, item 2
29 CFR 1910.146(c)(4) · Permit-required confined spaces
 Serious$2,772$2,772Jan 9, 2019Final
Citation 1, item 3
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$2,217$2,217Jan 9, 2019Final
Citation 1, item 4
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
 Serious$2,217$2,217Jan 9, 2019Final
Citation 1, item 5
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
 Serious$2,217$2,217Jan 9, 2019Final
Citation 1, item 6
29 CFR 1910.307(c)(2)(i) · Hazardous (classified) locations
 Serious$3,326$3,326Jan 9, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.146 · Permit-required confined spaces

29 CFR 1910.146(c)(4)

(4) If the employer decides that its employees will enter permit spaces, the employer shall develop and implement a written permit space program that complies with this section. The written program shall be available for inspection by employees and their authorized representatives.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.22 · Walking-working surfaces

29 CFR 1910.307 · Hazardous (classified) locations

Other other animal food manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.