Barrett Paving Materials, Inc.: OSHA inspections and violations
Cincinnati, Ohio · Highway, Street, and Bridge Construction · NAICS 237310
20inspections
9citation items
$30,800current penalties
May 15, 2019last inspection
OSHA has inspected Barrett Paving Materials, Inc. 20 times in Ohio since 1984.
The latest one began on May 15, 2019 as a planned inspection, in Cincinnati.
Those inspections ended with 9 citation items: 8 serious and 1 other-than-serious.
Penalties were first proposed at $68,252 and now stand at $30,800, 55% lower after settlements or reviews.
Trench protection comes up most often in these citations: 2 items under 1926.652.
How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Barrett Paving Materials, Inc. averages $20,000 (1 cited inspection).
2 inspections on this page followed a fatal incident.
Barrett Paving Materials, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
260employers cited
3 of them in the same industry
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Barrett Paving Materials, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Jul 9, 2007 (fatal): Employee is killed when struck by dump truck
On July 9, 2007, Employee #1, of Barrett Paving Materials, Inc., was struck by a dump truck as it was backing up at a work site. Employee #1 was killed.
No citations from this inspection.
Inspection 310131255 OPENED JUN 29, 2006Closed
Planned · Partial · Safety · 175 employees at the site · Closed Jun 30, 2006
Incident on Jun 10, 2005 (fatal): Employee is killed when struck by dump truck
On June 10, 2005, Employee #1, a flagger, was engaged in a flagging operation fo r a road construction milling crew. Employee #1 was utilizing a high visibility retro-reflective vest and a high visibility baseball cap. The operation also inv olved a dump truck, equipped with a working audible back-up alarm, and a milling machine. Employee #1 was walking south, down the temporary traffic zone, after the mill had completed a milling pass through the zone, and was ready to start a nother pull. As Employee #1 walked down the zone, the dump truck also began back ing down the zone. Employee #1, not hearing the audible alarm from the dump truc k, was in the blind spot of the driver's mirrors and was struck and killed by th e dump truck.
No citations from this inspection.
Inspection 18051573 OPENED AUG 11, 2000Closed
Referral · Partial · Health · 3 employees at the site · Closed Aug 17, 2000
Incident on Jul 26, 1994: Employee crushes finger in transfer pump belt
At around 9:00 a.m. on July 13, 1994, two employees were working on transfer bel t unit of a pump when they stopped to retrieve tools and parts. During that time a customer came to the plant. The operator then started the equipment without c hecking for Employee #1, the supervisor. He heard a cry. The transfer pump guard was off and the system was not locked out, causing three of Employee #1's finge rtips to be crushed in the belts and pulley area. Employee #1 also suffered a la ceration to his left hand.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 1910.132(a) · Personal protective equipment, general requirements
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Middletown site logged 3 recordable injuries or illnesses among about 262 workers: 1.7 per 100 full-time workers, against a median of 2.2 for its industry. Those cases cost 6 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
MWC Regional Office
Middletown · 2025
262
3
1
1.7
2.2
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(a)
(a) Application. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.