Saint Louis, Missouri · All Other Specialty Trade Contractors · NAICS 238990
Baths for Less, LLC has one OSHA inspection on record in Missouri.
OSHA opened it on Jan 12, 2023 on a referral, in Saint Louis.
From that inspection OSHA issued 2 citation items: 1 serious and 1 other-than-serious.
OSHA proposed $28,126 in penalties. After settlements and reviews the total is $14,063, down 50%.
Most often, OSHA cited 1910.213, woodworking machinery (2 items).
For context, across all construction employers the median penalty per cited inspection since 2015 is $3,079. Baths for Less, LLC averages $14,063 over 1 cited inspection in that time.
It reported 1 severe injury to OSHA since 2015.
Want to know if OSHA cites Baths for Less, LLC again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this company10100 Page Ave, Saint Louis, MO 63132 · All Other Specialty Trade Contractors · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.213(c)(1) · Woodworking machinery |
Serious | $14,063 | $7,032 | May 26, 2023 | Final |
| Citation 1, item 2 29 CFR 1910.213(c)(3) · Woodworking machinery |
Other-than-serious | $14,063 | $7,032 | May 26, 2023 | Final |
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jan 6, 2023, Saint Louis: Amputation · amputations · finger(s), fingernail(s), unspecified
An employee was building shelves. The employee was using a table saw to cut 2-by-4's into 1-inch pieces when the saw partially amputated their left thumb.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.213(c)(1)
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.213(c)(3)
(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.