OSHA SearchOSHA records by employer

BD Laplace, LLC: OSHA inspections and violations

La Place, Louisiana · Iron and Steel Mills and Ferroalloy Manufacturing · NAICS 331110

1inspections
8citation items
$31,825current penalties
Oct 2, 2018last inspection

OSHA inspectors have visited BD Laplace, LLC in Louisiana one time.

It opened on Oct 2, 2018 as a planned inspection, in La Place.

In all, OSHA issued 8 citation items: 6 serious and 2 other-than-serious.

The proposed penalties came to $53,042; today they stand at $31,825, 40% less.

The rule cited most here is 1910.303 (electrical equipment, general requirements), 4 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. BD Laplace, LLC averages $31,825 across 1 cited inspection.

It reported 2 severe injuries to OSHA since 2015.

BD Laplace, LLC: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Louisiana · latest 90 days of OSHA records

22employers cited

Get notified the morning OSHA posts each new citation in Louisiana: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Louisiana

Checking a subcontractor, a client or your own company? Watch BD Laplace, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343513206 OPENED OCT 2, 2018Closed

Planned · Partial · Health · 366 employees at the site · Closed Jun 3, 2019

138 Highway 3217, La Place, LA 70068 · Iron and Steel Mills and Ferroalloy Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.253(b)(2)(iv) · Gas welding and cutting
Serious$7,577$4,546Mar 25, 2019Final
Citation 1, item 2
29 CFR 1910.303(f)(2) · Electrical equipment, general requirements
Serious$9,472$5,683Mar 25, 2019Final
Citation 1, item 3
29 CFR 1910.303(g)(1)(ii) · Electrical equipment, general requirements
Serious$7,577$4,546Mar 25, 2019Final
Citation 1, item 4
29 CFR 1910.303(g)(2)(i) · Electrical equipment, general requirements
Serious$9,472$5,683Mar 25, 2019Final
Citation 1, item 5
29 CFR 1910.305(b)(1)(i) · Electrical wiring methods
Serious$9,472$5,683Mar 25, 2019Final
Citation 1, item 6
29 CFR 1910.305(b)(1)(ii) · Electrical wiring methods
Serious$9,472$5,683Mar 25, 2019Final
Citation 2, item 1
29 CFR 1910.303(e)(1)(ii) · Electrical equipment, general requirements
Other-than-serious$0$0Mar 25, 2019Final
Citation 2, item 2
29 CFR 1910.305(g)(2)(iii) · Electrical wiring methods
Other-than-serious$0$0Mar 25, 2019Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

Aug 12, 2019, La Place: Hospitalization, amputation · fractures · pelvis

An employee was removing a tundish with a remote overhead crane when the tundish fell off the crane and struck another employee against a second tundish on the floor. The injured employee suffered a broken pelvis.

May 2, 2018, La Place: Hospitalization · fractures · multiple body parts, n.e.c.

At approximately 12:50 p.m. on 5/02/2018, an employee was operating a remote control crane in the rolling mill. He and three other mill employees were changing out a mill stand. He had the remote control box for the crane hanging from a strap around his neck. When the stand is slid out of position for removal, an opening to the flume approximately 2' x 5' is exposed until the stands are swapped…

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.253(b)(2)(iv)

(iv) Valve protection caps, where cylinder is designed to accept a cap, shall always be in place, hand-tight, except when cylinders are in use or connected for use.

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.303(e)(1)(ii)

(ii) Other markings giving voltage, current, wattage, or other ratings as necessary.

29 CFR 1910.303(f)(2)

(2) Services, feeders, and branch circuits. Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident.

29 CFR 1910.305 · Electrical wiring methods

Other iron and steel mills and ferroalloy manufacturing employers in Louisiana

Alert subscribers get notified of each newly cited employer in Louisiana the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.