Benco Steel, Inc.: OSHA inspections and violations
Hickory, North Carolina · Metal Service Centers and Other Metal Merchant Wholesalers · NAICS 423510
8inspections
17citation items
$7,897current penalties
May 7, 2025last inspection
Since 1983, OSHA inspectors have visited Benco Steel, Inc. in North Carolina 8 times.
The most recent inspection opened on May 7, 2025 as a planned inspection, in Hickory.
In all, OSHA issued 17 citation items: 6 serious and 11 other-than-serious.
The proposed penalties came to $15,065; today they stand at $7,897, 48% less.
The rule cited most here is 1910.179 (overhead and gantry cranes), 4 times.
Among wholesale employers, the typical cited inspection since 2015 ends with a $3,423 penalty. Benco Steel, Inc. averages $3,824 across 2 cited inspections.
Benco Steel, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
North Carolina · latest 90 days of OSHA records
228employers cited
Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Hickory site logged 1 recordable injury or illness among about 37 workers: 2.5 per 100 full-time workers, against a median of 3.0 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Benco Steel, INC
Hickory · 2025
37
1
0
2.5
3.0
Benco Steel Inc.
Hickory · 2023
39
5
0
11.9
3.0
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(5) Transportation. (i) Chemical manufacturers, importers, or distributors shall ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged, or marked in accordance with this section in a manner which does not conflict with the requirements of the Hazardous Materials Transportation Act (49 U.S.C. 5101 et seq.) and regulations issued under that Act by the Department of Transportation (49 CFR subtitle B).
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(e)(3)
(3) Lockout or tagout devices removal. Each lockout or tagout device shall be removed from each energy isolating device by the employee who applied the device. Exception to paragraph (e)(3): When the authorized employee who applied the lockout or tagout device is not available to remove it, that device may be removed under the direction of the employer, provided that specific procedures and training for such removal have been developed, documented and incorporated into the employer's energy control program. The employer shall demonstrate that the specific procedure provides equivalent safety to the removal of the device by the authorized employee who applied it. The specific procedure shall include at least the following elements:
Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.