Bennett Tool and Die LLC: OSHA inspections and violations
Kansas City, Kansas · Metal Crown, Closure, and Other Metal Stamping (except Automotive) · NAICS 332119
2inspections
10citation items
$40,113current penalties
Oct 19, 2021last inspection
Since 2021, OSHA inspectors have visited Bennett Tool and Die LLC in Kansas 2 times.
The most recent inspection opened on Oct 19, 2021 as a planned inspection, in Kansas City.
In all, OSHA issued 10 citation items: 5 serious and 5 other-than-serious.
The proposed penalties came to $86,019; today they stand at $40,113, 53% less.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Bennett Tool and Die LLC averages $20,056 across 2 cited inspections.
Bennett Tool and Die LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Kansas · latest 90 days of OSHA records
48employers cited
Get notified the morning OSHA posts each new citation in Kansas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Kansas City site logged 4 recordable injuries or illnesses among about 38 workers: 10.3 per 100 full-time workers, against a median of 2.3 for its industry. Those cases cost 89 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Bennett Tool and Die LLC Kansas City
Kansas City · 2019
38
4
2
10.3
2.3
Bennett Tool & Die, LLC - KC
Kansas City · 2017
44
3
0
8.7
2.4
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(i) An employer may provide respirators at the request of employees or permit employees to use their own respirators, if the employer determines that such respirator use will not in itself create a hazard. If the employer determines that any voluntary respirator use is permissible, the employer shall provide the respirator users with the information contained in appendix D to this section (“Information for Employees Using Respirators When Not Required Under the Standard”); and
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in Kansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.