OSHA SearchOSHA records by employer

Bennora LP: OSHA inspections and violations

Corinth, Texas · Wood Kitchen Cabinet and Countertop Manufacturing · NAICS 337110

2inspections
4citation items
$13,030current penalties
May 6, 2025last inspection

Since 2018, OSHA inspectors have visited Bennora LP in Texas 2 times.

The most recent inspection opened on May 6, 2025 as a planned inspection, in Corinth.

In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

The proposed penalties came to $21,717; today they stand at $13,030, 40% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Bennora LP averages $6,515 across 2 cited inspections.

Bennora LP also files yearly injury logs with OSHA, summarized below.

Bennora LP: OSHA citation items per year, 2018 to 2025
Citation items per year, by inspection date.

Want to know if OSHA cites Bennora LP again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348231440 OPENED MAY 6, 2025Closed

Planned · Partial · Safety · 94 employees at the site · Closed Sep 16, 2025

3100 Walton Dr., Corinth, TX 76208 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(6)(i) · Fall protection in general industry
 Serious$9,268$5,561Aug 28, 2025Final
Citation 1, item 2
29 CFR 1910.242(b) · Hand and power tools
 Serious$5,628$3,377Aug 28, 2025Final
Citation 2, item 1
29 CFR 1904.41(a)(2) · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
 Other-than-serious$1,324$794Aug 28, 2025Final

Inspection 342998887 OPENED MAR 6, 2018Closed

Planned · Partial · Safety · 82 employees at the site · Closed Feb 19, 2019

3100 Walton Dr., Corinth, TX 76208 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$5,497$3,298Mar 9, 2018Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Corinth site logged 1 recordable injury or illness among about 92 workers: 1.0 per 100 full-time workers, against a median of 2.3 for its industry. Those cases cost 1 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Metroplex Cabinets
Corinth · 2025
92 111.02.3
bennora lp
Corinth · 2024
93 000.03.7

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.41 · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA

29 CFR 1904.41(a)(2)

(2) Annual electronic submission of information from OSHA Form 300 Log of Work-Related Injuries and Illnesses and OSHA Form 301 Injury and Illness Incident Report by establishments with 100 or more employees in designated industries. If your establishment had 100 or more employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix B to subpart E of this part, then you must electronically submit information from OSHA Forms 300 and 301 to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the forms.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.242 · Hand and power tools

29 CFR 1910.242(b)

(b) Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.

29 CFR 1910.28 · Fall protection in general industry

Other wood kitchen cabinet and countertop manufacturing employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.