OSHA SearchOSHA records by employer

Bentley Baldwin: OSHA inspections and violations

Whispering Pines, North Carolina · Roofing Contractors · NAICS 238160

1inspections
5citation items
$2,325current penalties
Jul 11, 2017last inspection

OSHA has inspected Bentley Baldwin once in North Carolina.

The inspection began on Jul 11, 2017 as a planned inspection, in Whispering Pines.

That inspection ended with 5 citation items: 5 serious.

Penalties were first proposed at $3,100 and now stand at $2,325, 25% lower after settlements or reviews.

Ladders in construction comes up most often in these citations: 2 items under 1926.1053.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,079, and Bentley Baldwin averages $2,325 (1 cited inspection).

Bentley Baldwin: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites Bentley Baldwin again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342459203 OPENED JUL 11, 2017Closed

Planned · Complete · Safety · 4 employees at the site · Closed Jul 25, 2024

518 Dowd Rd, Whispering Pines, NC 28327 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.501(b)(10) · Fall protection in construction
 Serious$1,000$750Aug 17, 2017Final
Citation 1, item 1b
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$0$0Aug 17, 2017Final
Citation 1, item 2a
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$2,100$1,575Aug 17, 2017Final
Citation 1, item 2b
29 CFR 1926.1053(b)(16) · Ladders in construction
 Serious$0$0Aug 17, 2017Final
Citation 1, item 2c
29 CFR 1926.1060(a) · Ladder and stairway training
 Serious$0$0Aug 17, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(16)

(16) Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, shall either be immediately marked in a manner that readily identifies them as defective, or be tagged with “Do Not Use” or similar language, and shall be withdrawn from service until repaired.

29 CFR 1926.1060 · Ladder and stairway training

29 CFR 1926.1060(a)

(a) The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

Other roofing contractors employers in North Carolina

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.