OSHA SearchOSHA records by employer

BMC - Building Materials & Construction Solutions: OSHA inspections and violations

El Paso, Texas · Commercial and Institutional Building Construction · NAICS 236220

1inspections
7citation items
$12,335current penalties
Apr 15, 2019last inspection

OSHA inspectors have visited BMC - Building Materials & Construction Solutions in Texas one time.

It opened on Apr 15, 2019 on a referral, in El Paso.

In all, OSHA issued 7 citation items: 7 other-than-serious.

The proposed penalties came to $41,675; today they stand at $12,335, 70% less.

The rule cited most here is 1910.147 (lockout/tagout), 6 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. BMC - Building Materials & Construction Solutions averages $12,335 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

BMC - Building Materials & Construction Solutions: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

401employers cited

9 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch BMC - Building Materials & Construction Solutions and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343933099 OPENED APR 15, 2019Closed

Referral · Partial · Health · 1,500 employees at the site · Closed Dec 8, 2021

12121 Dyer St,, El Paso, TX 79934 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

Incident on Apr 13, 2019: Employee's fingers are lacerated by power saw

At 10:15 a.m. on April 13, 2019, Employee #1, employed by a construction company, was using compressed air to clean an Alpine Linear Saw (ALS). The power saw activated and struck the employee's right hand, lacerating three fingers. The employee was transported to the hospital, where he was admitted and treated for the injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(4)(ii) · Lockout/tagout
Other-than-serious$8,335$8,335Sep 24, 2019Final
Citation 1, item 2 Other-than-serious$8,335$0Sep 24, 2019Final
Citation 1, item 3
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Other-than-serious$8,335$0Sep 24, 2019Final
Citation 1, item 4a
29 CFR 1910.147(d)(1) · Lockout/tagout
Other-than-serious$8,335$0Sep 24, 2019Final
Citation 1, item 4b
29 CFR 1910.147(d)(2) · Lockout/tagout
Other-than-serious$0$0Sep 24, 2019Final
Citation 1, item 4c
29 CFR 1910.147(d)(3) · Lockout/tagout
Other-than-serious$0$0Sep 24, 2019Final
Citation 1, item 5
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Other-than-serious$8,335$4,000Sep 24, 2019Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Apr 12, 2019, El Paso: Hospitalization · cuts, lacerations · hand(s), unspecified

An employee was cleaning a linear saw using compressed air. The saw activated and the employee suffered lacerations to the right hand.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(ii)

(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:

29 CFR 1910.147(c)(5)(ii)(d)

(D) Identifiable. Lockout devices and tagout devices shall indicate the identity of the employee applying the device(s).

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other commercial and institutional building construction employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.