Since 2018, OSHA inspectors have visited Boyd Corporation in Georgia 2 times.
The most recent inspection opened on Feb 16, 2022 on a referral, in Fairburn.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $24,862; today they stand at $14,917, 40% less.
The rule cited most here is 1910.147 (lockout/tagout), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Boyd Corporation averages $14,917 across 1 cited inspection.
Boyd Corporation also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Georgia · latest 90 days of OSHA records
146employers cited
Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.
Incident on Feb 8, 2022: Employee amputates finger while repairing conveyor belt
At 10:00 a.m. on February 8, 2022, an employee was informed that a conveyor belt was not working properly, he proceeded to inspect the machine to identify the issue. The employee went inside the machine's drive motor and drive belt section when the machine started moving, amputating his right pinky finger. The employee was hospitalized for treatment.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Fairburn site logged 11 recordable injuries or illnesses among about 216 workers: 6.1 per 100 full-time workers, against a median of 2.9 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Boyd Corporation Fairburn
Fairburn · 2018
216
11
1
6.1
2.9
Boyd -Fairburn
Fairburn · 2017
160
7
3
6.4
2.1
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.
An employee was getting parts out of a box to inspect, tripped on the corner of a pallet and fell. The employee was hospitalized with injuries to the left side and right arm.
An employee was retrieving a piece of plastic from a plastic cutter machine when the blade amputated his left ring and middle fingertips. The machine was guarded at the time.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
Other gasket, packing, and sealing device manufacturing employers in Georgia
Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.