Brigham Young University: OSHA inspections and violations
Provo, Utah · Colleges, Universities, and Professional Schools · NAICS 611310
34inspections
50citation items
$81,622current penalties
Aug 10, 2023last inspection
Since 1982, OSHA inspectors have visited Brigham Young University in Utah 34 times.
The most recent inspection opened on Aug 10, 2023 after an accident, in Provo.
In all, OSHA issued 50 citation items: 33 serious and 17 other-than-serious.
The proposed penalties came to $95,325; today they stand at $81,622, 14% less.
The rule cited most here is 1926.1053 (ladders in construction), 3 times.
Among education employers, the typical cited inspection since 2015 ends with a $0 penalty. Brigham Young University averages $5,719 across 8 cited inspections.
Brigham Young University also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Utah · latest 90 days of OSHA records
70employers cited
Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.
Incident on Dec 17, 2001: Employee crushed by falling equipment
Some employees were loading a Genie Manlift Model Number AWP36S, pushing the lif t from the dock to a truck for transport. Using equipment not suited for the tas k. Employee #1 sustained broken ribs, internal injuries, and a crushed pelvis wh en a piece of equipment fell on him. He was hospitalized for his injuries.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 6020101
Serious
$2,450
$2,450
Apr 4, 2002
Closed
Inspection 303608384 OPENED JUL 21, 2000Closed
Accident · Partial · Safety · 10,000 employees at the site · Closed Nov 20, 2000
Incident on Jul 20, 2000: Employee's skull fractured when scaffold overturns
At approximately 10:30 a.m. on July 20, 2000, Employee #1, a student, was workin g part-time for the custodial department at Brigham Young University. He was ass igned to disassemble and move a rolling, self-propelled 8 ft 3 in. long by 29 in . wide by 20 ft 5 in. tall scaffold in the atrium of a campus building. The scaf fold had been used by electricians to repair a light fixture mounted high on the west wall. After completing the repairs, the electricians had taken some of the scaffold's structural bars off the top and hung them on the long, east side. Th e stabilizing outriggers had also been removed and were sitting by the scaffold. Employee #1 climbed up the southern, narrow end of the scaffold within sight of his supervisor and swung around to the east side to retrieve the hanging parts. His weight, along with the unbalanced weight of the metal scaffold bars, caused the scaffold to become unstable and to tip over. Employee #1 was thrown off and fell 15 ft onto a brick walkway, He fractured his skull and was comatose for se veral days. Both Employee #1 and his supervisor had attended scaffold safety tra ining. Employee #1 was discharged from the hospital within a week and has made a full recovery.
Incident on Jul 15, 1999: Electric shock - direct contact with energized parts
An employee received an electric shock from a power supply when he connected a t ester to a terminal incorrectly. He was hospitalized for his injuries.
No citations from this inspection.
Inspection 126772722 OPENED JUN 10, 1997Closed
Planned · Partial · Health · 6,000 employees at the site · Closed Jun 11, 1998
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Provo site logged 111 recordable injuries or illnesses among about 21,011 workers: 1.1 per 100 full-time workers, against a median of 1.2 for its industry. Those cases cost 641 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Brigham Young University
Provo · 2025
21,011
111
37
1.1
1.2
BYU Risk Management
Provo · 2021
18,275
122
23
1.2
1.2
Included with any plan: 7 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(a)
(a) Application. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.
(5) Protective materials and hardware. (i) Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.