Bucyrus Precision Tech, Inc.: OSHA inspections and violations
Bucyrus, Ohio · Motor Vehicle Transmission and Power Train Parts Manufacturing · NAICS 336350
3inspections
3citation items
$7,000current penalties
Sep 4, 2019last inspection
Since 2003, OSHA inspectors have visited Bucyrus Precision Tech, Inc. in Ohio 3 times.
The most recent inspection opened on Sep 4, 2019 on a referral, in Bucyrus.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $14,000; today they stand at $7,000, 50% less.
The rule cited most here is 1910.147 (lockout/tagout), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Bucyrus Precision Tech, Inc. averages $7,000 across 1 cited inspection.
Bucyrus Precision Tech, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
267employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Bucyrus Precision Tech, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Aug 29, 2019: Employee crushes fingertips when caught in cnc lathe pinch p
At 5:30 a.m. on August 29, 2019, an employee was changing out a chuck on a 3-2 Mori Seiki CL 2000 hydraulic computer numerical control (CNC) lathe at a motor vehicle transmission and power train parts manufacturing facility. Prior to attempting to realign the new chuck, the employee did not deenergize the lathe. The employee accidentally pressed the foot pedal while changing the chuck, causing the chuck to open and pull the bar back. The employee's left middle and ring fingers caught in the pinch point between the chuck and faceplate. The employee was hospitalized and required medical amputation of the ring and middle fingertips. While the employer does have a lockout/tagout (LOTO) program, the employee did not utilize the procedure.
No citations from this inspection.
Inspection 341106847 OPENED DEC 9, 2015Closed
Referral · Partial · Safety · 350 employees at the site · Closed Jul 27, 2016
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Bucyrus site logged 1 recordable injury or illness among about 63 workers: 1.6 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Bucyrus Precision Tech, Inc.
Bucyrus · 2021
63
1
0
1.6
2.7
Bucyrus Precision Tech Inc
Bucyrus · 2017
260
11
1
4.0
2.7
Included with any plan: 4 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Aug 29, 2019, Bucyrus: Hospitalization, amputation · amputations · fingertip(s)
An employee was changing the chuck in a lathe when the chuck clamped and crushed the employee's fingers, resulting in amputations of the left third and fourth fingertips.
An employee was trying to pop a load bearing out. He put both fingers into the area of the locking pin and then it came down and amputated the distal aspect of the right index and little fingers.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
29 CFR 1910.147(d)
(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:
Other motor vehicle transmission and power train parts manufacturing employers in Ohio
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.