Since 2011, OSHA inspectors have visited Buhler Versatile USA Inc in Minnesota 3 times.
The most recent inspection opened on Jan 6, 2020 as a planned inspection, in Willmar.
In all, OSHA issued 7 citation items: 6 serious and 1 other-than-serious.
The proposed penalties came to $7,400; today they stand at $6,200, 16% less.
The rule cited most here is 5206.700 (), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Buhler Versatile USA Inc averages $2,380 across 2 cited inspections.
Buhler Versatile USA Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
373employers cited
4 of them in the same industry
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Willmar site logged 7 recordable injuries or illnesses among about 52 workers: 14.5 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 47 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Buhler Versatile USA, Inc.
Willmar · 2019
52
7
2
14.5
2.7
Buhler Versatile USA
Willmar · 2018
74
6
2
9.0
2.7
Included with any plan: 1 more yearly log from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.