Bumble Bee Foods, LLC: OSHA inspections and violations
Cape May, New Jersey · Seafood Product Preparation and Packaging · NAICS 311711
2inspections
4citation items
$16,000current penalties
Nov 18, 2024last inspection
Bumble Bee Foods, LLC has 2 OSHA inspections on record in New Jersey, the first in 2015.
OSHA's last visit started on Nov 18, 2024 as a planned inspection, in Cape May.
Across those inspections OSHA issued 4 citation items: 4 serious.
OSHA proposed $19,860 in penalties. After settlements and reviews the total is $16,000, down 19%.
Most often, OSHA cited 1910.219, belts, pulleys and power-transmission parts (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,875. Bumble Bee Foods, LLC averages $16,000 over 1 cited inspection in that time.
Bumble Bee Foods, LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
New Jersey · latest 90 days of OSHA records
276employers cited
Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.
OSHA records show Bumble Bee Foods, LLC at 2 sites in 2 states. Together they've had 6 inspections and $153,865 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Cape May site logged 0 recordable injuries or illnesses among about 50 workers: 0.0 per 100 full-time workers, against a median of 4.8 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Cape May NJ
Cape May · 2025
50
0
0
0.0
4.8
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1910.219(e)(1)(i)
(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.
Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.