OSHA SearchOSHA records by employer

Burkhard Corporation: OSHA inspections and violations

Killington, Vermont · Commercial and Institutional Building Construction · NAICS 236220

2inspections
12citation items
$13,490current penalties
Oct 29, 2019last inspection

OSHA has inspected Burkhard Corporation 2 times in Vermont since 2019.

The latest one began on Oct 29, 2019, in Killington.

Those inspections ended with 12 citation items: 10 serious and 2 other-than-serious.

Penalties were first proposed at $26,142 and now stand at $13,490, 48% lower after settlements or reviews.

Job-site wiring comes up most often in these citations: 3 items under 1926.405.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Burkhard Corporation averages $6,745 (2 cited inspections).

Burkhard Corporation: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Vermont · latest 90 days of OSHA records

24employers cited

Get notified the morning OSHA posts each new citation in Vermont: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Vermont

Checking a subcontractor, a client or your own company? Watch Burkhard Corporation and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344466826 OPENED OCT 29, 2019Closed

Programmed other · Complete · Safety · 6 employees at the site · Closed May 24, 2021

47 Old Mill Rd., Killington, VT 05751 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(i)(1) · Woodworking tools
Serious$3,978$2,386Jan 21, 2020Final
Citation 1, item 2a
29 CFR 1926.403(i)(2)(i) · Electrical equipment on job sites
Serious$1,705$1,000Jan 21, 2020Final
Citation 1, item 2b
29 CFR 1926.405(j)(1)(i) · Job-site wiring
Serious$1,705$0Jan 21, 2020Final
Citation 1, item 2c
29 CFR 1926.405(j)(1)(ii) · Job-site wiring
Serious$1,705$0Jan 21, 2020Final
Citation 1, item 5
29 CFR 1926.501(b)(10) · Fall protection in construction
Serious$3,978$2,386Jan 21, 2020Final
Citation 1, item 6
29 CFR 1926.1052(c)(1) · Stairways in construction
Other-than-serious$1,705$900Jan 21, 2020Final
Citation 1, item 7
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$3,978$2,386Jan 21, 2020Final
Citation 2, item 1
29 CFR 1926.405(a)(2)(ii)(e) · Job-site wiring
Other-than-serious$0$0Jan 21, 2020Final

Inspection 344365010 OPENED SEP 18, 2019Closed

Programmed other · Partial · Safety · 8 employees at the site · Closed May 24, 2021

47 Old Mill Rd., Killington, VT 05751 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.602(d) · Earthmovers and forklifts in construction
Serious$3,410$2,046Jan 27, 2020Final
Citation 1, item 1b
29 CFR 1926.602(c)(1)(vi) · Earthmovers and forklifts in construction
Serious$0$0Jan 27, 2020Final
Citation 1, item 2a
29 CFR 1926.501(b)(1) · Fall protection in construction
Serious$3,978$2,386Jan 27, 2020Final
Citation 1, item 2b
29 CFR 1926.503(b)(1) · Fall protection training in construction
Serious$0$0Jan 27, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1052 · Stairways in construction

29 CFR 1926.1052(c)(1)

(1) Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, shall be equipped with:

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.403 · Electrical equipment on job sites

29 CFR 1926.405 · Job-site wiring

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

29 CFR 1926.602 · Earthmovers and forklifts in construction

Other commercial and institutional building construction employers in Vermont

Alert subscribers get notified of each newly cited employer in Vermont the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.